Manual

:;1~'N~~~ 4. WITH THE SAFETY STILL IN THE
~ "ON" POSITION, pull the cocking
handle all the way back to remove the shell
from the chamber.
~ HOW TO FIRE
- WITH THE SAFETY
~ "ON" load your gun as previously in-
structed. When ready to shoot, firmly shoul-
der your gun and push the safety to the "off"
position exposing the red warning ring. Aim,
and when on target pull the trigger to fire.
ON
~
~. I
I
"
~
--------
~ When fired, the Model 1400's auto-
'Y matic action will eject the fired shell,
cock the hammer and on closing will place
a new shell from the magazine into the cham-
ber ready for the next shot. When the last
shell in the gun is fired the action will remain
open and convenient for reloading. WHEN
THROUGH FIRING ALWAYS PUT THE
SAFETY IN THE "ON" POSITION.
~ TO TAKE DOWN
-
1. OPEN THE AC-
~ TION AND MAKE SURE THE GUN IS
NOT LOADED.
2. Close the action and PLACE THE SAFETY
IN THE "ON" POSITION.
3. Unscrew and remove the valve assembly
from the magazine.
--
4. To remove the barrel, slide the barrel and
forearm forward as a single unit until the
forearm clears the end of the magazine tube.
~
5. Remove the forearm from the barrel by
sliding the forearm to the rear and lifting free
of the magazine bracket on the barrel.
TO REMOVE THE BREECH BOLT
1. Remove the barrel and forearm as ex-
plained earlier.
:;~~...~~~2. BE SURE GUN IS UNLOADED.
~ CLOSE ACTION, PUSH SAFETY TO
"ON" POSITION, turn gun until trigger guard
is up, and push out trigger guard pin from left.