Manual
3
7. Before firing, clean any grease or oil out of barrel with
cleaning rod and patch. Grease or heavy accumulation of
oil can cause excessive pressure and result in serious
personal injury.
8. Keep barrel, chamber and action free of rust. Rust in the
barrel and chamber can cause excessive pressures resulting
in serious injury. A rusted, pitted or eroded barrel should
be replaced.
9. Use hearing protection to prevent ear damage from
repeated exposure to gunfire.
10. Always use proper shooting glasses to prevent eye
injury from flying particles.
11. Never carry a loaded gun in a motor vehicle or carry
one into a dwelling. Always carefully unload the gun
before entering a motor vehicle, a dwelling or an area such
as a camp. Always point a gun in a safe direction while
loading or unloading to prevent serious injury in case of an
accidental discharge. Never load in the house or in your
vehicle.
12. Never shoot at a hard, flat surface or at the surface of
water to avoid a ricochet and possible serious personal
injury to yourself or a bystander.
13. Store gun in a clean dry place out of reach of children
and separated from stored ammunition.
14. Never alter any parts of your gun. Any alterations or
adjustments that may become necessary to the operating
mechanism should be performed by a qualified gunsmith.
15. Hunting from elevated surfaces such as tree stands is
dangerous. Doing so may increase the risk of handling any
firearm. Always make certain that the stand being used is
safe, sturdy and stable. Always make certain your firearm is
unloaded when it is being taken up and down from the
stand. Always make certain that your firearm is not
dropped from the stand or dropped while it is being taken
up or down from the stand.
Be Careful!
GENERAL DESCRIPTION
Your new Model 1300 is one of a number of different ver-
sions and configurations offered. The basic operating pro-
cedures are the same for nearly all of them. Where there
are differences they are pointed out in this booklet for your
convenience.
The Model 1300 is a pump action design that allows the
shooter to load a round by cycling the action and moving
a shell from a loaded magazine tube to the chamber.