Manual

8. When transporting only, store your Model 1300 in a
quality protective case to prevent scratches and dents.
Store in a dry place to prevent corrosion. Store away from
children.
MAKE SURE YOUR SHOTGUN IS UNLOADED
AND ALWAYS STORE AMMUNITION
SEPARATELY.
OTHER CLEANING SUGGESTIONS
• Never pour large quantities of oil into the receiver or
other parts. It can drain down to the wood and soften it —
and cause permanent damage and loosening of the stock.
• After extended periods of heavy use, your shotgun
should be taken to a qualified gunsmith to have the action
disassembled for professional cleaning and lubrication.
• Camouflage models require the same care and cleaning
as non-camouflage. Use the same oils and solvents as
described previous in this manual.
NEVER ATTEMPT TO TAKE YOUR MODEL 1300
APART FURTHER THAN EXPLAINED IN THIS
MANUAL.
This is a specialized, finely fitted mechanism. You may
permanently mar it by attempting to disassemble the inner
mechanism assemblies. If further disassembly for
service or cleaning is required, take your gun to a U. S.
Repeating Arms Company recommended Service Center
or a competent gunsmith as explained under “Service
or Repair.”
ORDERING PARTS
To order parts, please write our parts department and
furnish the following: your name, address, and telephone
number. Also specify the model and serial number of your
Winchester Model 1300. When we receive your request,
we will send an order form and a parts breakdown with
prices.
Write to:
Parts Department
U.S. Repeating Arms Company, Inc.
275 Winchester Avenue
New Haven, Connecticut 06511-1970
CAUTION: PARTS ARE MADE FOR
WINCHESTER BRAND FIREARMS MANUFAC-
TURED BY U.S. REPEATING ARMS COMPANY,
INC., AND SHOULD NOT BE USED IN OTHER
GUNS EVEN THOUGH MODELS MAY BE SIMI-
LAR. IMPROPERLY FITTED PARTS MAY BE
DANGEROUS.
27