Manual

REMOVING THE MAGAZINE PLUG

When hunting migratory birds, Federal Law mandates the

use of a magazine restriction devise that allows only a total

of three shells to be held in your shotgun at one time.

WHEN REMOVING THE PLUG BE CERTAIN

THERE ARE NO SHELLS IN THE MAGAZINE OR

CHAMBER AND KEEP THE BARREL AND MAG-

AZINE POINTED IN A SAFE DIRECTION AT ALL

TIMES.

REMEMBER, THE PLUG IS UNDER SPRING

PRESSURE SO CARE MUST BE TAKEN FOR

SAFE REMOVAL. ALWAYS POINT THE END OF

THE MAGAZINE AWAY FROM YOUR FACE AND

IN A SAFE DIRECTION.

ALWAYS WEAR EYE PROTECTION WHEN

REMOVING AND REINSTALLING THE MAGA-

ZINE’S 3-SHOT PLUG.

The magazine plug is spring loaded and can thrust out of

the magazine when the friction-type magazine retainer is

removed too quickly. Never look directly down into the

cap end of the open magazine.

1. Remove the magazine cap.

2. Place one hand over the retainer and pry it up slowly

with a screw driver using your other hand (see Figure 7).

When the retainer releases you will feel the pressure of the

friction ring and plug on the palm of your hand.

3. Slowly raise your hand and let the magazine spring

relax. Capture the parts in your hand as they spring out.

4. With the spring relaxed, the friction ring, plug, spring

and follower can be removed. To reinstall, reverse this

procedure.

FIGURE 7

Carefully pry up on the

magazine spring retainer.

Catch the components as

they spring out.