SPECIAL SUPPLEMENT Licensee Winchester trademarks licensed from Olin Corporation.
WINCHESTER SUPER X2 PRACTICAL Some components, like certain surface areas of the magazine tube, have been configured for heavy use. Your Super X2 Practical is supplied with one (1) Standard Invector™ choke tube, which is choked cylinder bore. Other tubes are available as accessories from your dealer. This supplement addresses the unique features of the Super X2 Practical only. General instructions and warnings are contained in the complete Super X2 owner’s manual supplied with your gun.
FIGURE 2 Gas Piston Sleeve Spring Gas Sleeve FIGURE 3 Barrel Magazine Sleeve Line up the protrusion with the recess in the forearm. Forearm ALWAYS PLACE THE SAFETY IN THE “ON SAFE” POSITION BEFORE BEGINNING ANY WORK ON YOUR SHOTGUN. CHECK YOUR GUN CAREFULLY TO BE CERTAIN THAT THE CHAMBER, FEED MECHANISM AND MAGAZINE CONTAIN NO SHELLS. ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION. READ AND HEED THE SAFETY/WARNINGS SECTION IN THE FIRST PART OF THE COMPLETE SUPER X2 OWNER’S MANUAL. 5.
NOTES sight in the dove tail. Carefully tap with a hammer using a non-metal drift against the sight base. CLEANING PARTS WITH SPECIAL FINISHES Be especially careful when cleaning guns with Dura-Touch® Armor Coating and other special finishes. Always prevent these surfaces from coming in contact with cleaning solvents, barrel scrubbers and other strong chemicals.
