Safety (Historic Manual) Owner's manual

9
FAMILIAR WITH ALL PART NAMES LISTED
BEFORE PROCEEDING WITH THE REST OF
THE INSTRUCTIONS IN THIS MANUAL.
S
ERIAL NUMBER
The serial number is located on the bottom of the receiv-
er, at the front, close to where it contacts the rear of the
forearm. Record the serial number in this booklet for
future reference.
AMMUNITION
Your Winchester Model 9410 is designed to shoot modern
factory shotgun shells only. It is chambered in .410 bore
with a 2
1
⁄2" chamber length.
The gauge of your new Model 9410 is inscribed on the
barrel near the receiver. Use only ammunition for which
your Model 9410 is chambered — as indicated on the
barrel — to prevent excessive pressure and possible serious
injury. Please observe these important specifications and
restrictions regarding your new Model 9410 shotgun.
• Factory .410 bore shotgun shells only.
• Chambered for 2
1
⁄
2" shells only.
Manual
hammer
stop/safety
Pushed
forward:
“off safe”
Pushed to
rear:
“on safe”
Rebounding
hammer
FIGURE 1B
Finger lever
Trigger guard
Trigger
Rebounding
hammer
Manual hammer stop/safety
Trigger stop
FIGURE 1C
02-224-WFA_9410_OM_revis 7/16/03 2:52 PM Page 9