Owner manual

TO ASSEMBLE TRIGGER GROUP TO RECEIVER

1. Be sure hammer is cocked in trigger group as

i I I ustrated.

2. Be sure that the slide arms

are in the cut outs

on the bottom of the bolt assembly.

3. Assemble trigger group to the receiver by carefully

working the front end of the group into the slots

at the front end of receiver. Gently push rear end of

trigger group down into position. If the front end

of the trigger group is correctly positioned, this will

require little effort. DO NOT FORCE.

4. Insert trigger guard pin from right to left and

push in flush with side of receiver.