Function Frustration H&B Main Function Description 1. Modes switch 2. Previous song 3. Play / Pause { Mute 4. Next song 5.
6. DC BV charging slot 7. U Disk slot 8. Power on / Power off / Volume adjustment 9. MIC slot 10. Aux slot 11. Digital display screen Detailed introduction 1. Plug and play + Turn on speaker with power switch on top of control panel, and the display shows "Hi" then the " * is displayed. Plug the headset microphones into MIC slot, and then your voice will be amplified. When a wired microphone is plugged in any mods, a "MIC" mark will be displayed on the screen.
You can play music and amplify your voice at the same time. in USB and Bluetooth playing mode: You can long press the bunion to adjust the volume of BGM.
2. How to play music via U Disk insert U Disk into the USB slot, speaker will play music automatically. Short press* J “to switch to the next song, short press *{ * to switch to the previous song. The screen will display the corresponding song number first, then show play time. When the U disk is inserted, it will automatically switch to "USB® mode. In the "USB" mode, long press the * (3* button to switch fo single loop, and long press” (2 button again fo switch back to all loop.
3. How to play recording After plugging the microphone and the U disk, short press the * (O° button to start recording, the screen displays” | sig | the number 00:03 on the screen is the recording time. Short press the * $9" button or short press the * (" button to quit the recording. + The recording file is saved in the U disk. Long press the “) "button to play the recording file, and short press the" (3 * or "buttons to switch to the previous recording file or next recording file.
4. How to play music via AUX input Connect speaker to external audit device { with 3.5mm audio output like computer) via audio cable included, $398 will automatically switch to the AUN mode with the screen displays” BEGUILE °. \f there is music playing, horn press the * £5 *mutton, $398 will pause playing and muted. And short press the" & "button again to resume music playing.
5. How to play music via Bluetooth Press the" ("button to switch fo the Bluetooth mode, when the Bluetooth is not connected, the screen displays "blue" with indicator flashing, and it will enter Bluetooth pairing mode automatically. + Tum on your Bluetooth devices, find the device with the Bluetooth named S338 in the list, click fo connect. After the pairing Is successful, The display shows" [aus with a successful connection prompt. Then the * BLUE’ on the sneer will keep on. How to play TWS 1.
6. How to charge the speaker « Using fast charging technology, it only takes 2 hours to {fully charge the amplifier, and it supports charging while using. + When the battery indicator flashes, it means that $398 needs to be charged. + In charging status: The current battery level " * will be displayed on the screen. The longer charring time, the larger number on the screen before fully charged. « Fully charged: The * i001" stays on the screen.
Please note: 1. Please use a DC 5V power adapter to charge the speaker. 2. Plug adapter into 110-240 AC outlet. Connect the cable end into the DC 5V power input on speaker. 3. It will normally take 2 hours to fully charge the battery. 4. When charging, the battery level is displayed, and it shows "100" after fully charged, &. In order to extend the life of the internal battery, pleads charge it regularly even if system is not being used. 8.
Specifications 10 Output power 200 Frequency repose 20Hz-20KHz Battery capacity | 2500mah Charging time 2H Music playing time | 19H (medium volume} | Amplifying voice ime | 18H How to wear voice amplifier unit:
FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: {1) This device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by muting the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Package included: + 1* Speaker + 1* Waistband + 1* Audio cable + 1* User manual 1* Headset microphone + 1* Type-¢ charging cable + 1* USB-PD charging plug After-sale service Win Bridge provides one year warranty and lifetime technical support. f= 4] HTTP/ WWW weighbridge. com Please be confident that seller support is just a mail away from you in case you find any difficulty. Kindly do not hesitate to write back to us if you need any clarification or any kind of support.
