ASSEMBLY INSTRUCTION Customer Service If there are missing part or broken parts, or if you need thither assistance please contact customer service online. Notice: 1. 50% Tighten before fixing all screws. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screws with totals gradually. 4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5.
No Picture Parts Qty A Table top 1 B 4 leg 4 % & Ley Support ; o Stud M848 4 E Sower MB*50 a i Flat Washer F i (ai) 12 3 Spring Washer i G 8 (Emm) 12 H a Nut (mm) 12 | i Protective Cap 8 J So Wrench 1 M Lin Screwdriver 1
Screw D in and insert the leg. Then put F,G,H on.Please note haft don't tighten the screw until you finish the assembly. Please note that don't tighten the screw until you finish the assembly.
