Use and Care Manual

First proceed as described in “Assembling the meat grinder” item 1
to item 3(A).
1. Position the 2-piece Kibbe attachment on the shaft of the scroll.
NOTE
The guides on attachment (A) are located in recesses on the scroll
housing.
2. Rotate the catch clockwise.
3. You can now attach the food tray with your meat or dough
mixture.
See below “Electrical connection”.
Assembly of the sausage attachment
Please also observe our illustrations under “C”.
1. Position the sausage attachment on the scroll housing.
2. Rotate the catch clockwise.
3. You can now attach the food tray with whatever you want to
grind.
See below “Electrical connection/Application instructions”.
Electrical connection
Ensure that the function switch is set to “0”<off>.
Connect appliance to correctly installed and earthed socket
220-240V,50/60Hz.
The switches, the return
The appliance is equipped with a forward and return function. If the
scroll should block, you can use the return function, in order to
release it.
For your safety, the forward and return functions have been
combined with two switches.
Forward: Move the safety switch (4) to “ON” and the switch (3)
to “ON”. The appliance is in the “Forward” mode. Switching to the
return mode is not possible.
Return: Move the safety switch (4) to “R”and the switch (3) to
“R(Reverse)”. The appliance is in the “Return” mode. Switching to
the forward mode is not possible.
Switching off
Move the safety switch (3) to “O” and pull the power plug.
Application instructions