Instructions / Assembly

Part List:

Step 1: Install the Seat

1. Attach G and J to EL and ER

(Left and right cannot be

interchanged, check the arrow)

2. Attach part I, then follow the

positioning mark to attach 5 seat

panels H

VINGLI ADIRONDACK CHAIR

Assembly Instruction

Read before you start: This assembly takes about 20 mins/person, an electric

screwdriver is highly recommended. Do not screw too tight until you finish the last step.

PAGE 1
VINGLI ADIRONDACK CHAIR Assembly Instruction Part List: Read before you start: This assembly takes about 20 mins/person, an electric screwdriver is highly recommended. Do not screw too tight until you finish the last step. Step 1: Install the Seat 1. Attach G and J to EL and ER (Left and right cannot be interchanged, check the arrow) 2.
PAGE 2
Step 2: Install the Back 1. Attach C1 and C7 to D1, D2, and D3 (make sure the bottom of C1 C7 are on a horizontal line, check the arrow) 2. Attach the middle back panel C4 Step 3: Install the Legs Double washers Double washers 1. Attach BR and BL to the seat (Left and right cannot be interchanged, check the arrow) 3. Attach the rest back panels C2, C3, C5, C6 Step 4: Install the Arms Double washers Double washers 1. Attach AR and AL to the legs (Left and right cannot be interchanged) 2.
PAGE 3
Step 5: Connect the Back 1. Connect the finished back to part F 2. Connect the arms to the back Step 6: Finish the Look! Thank you so much for shopping with VINGLI. For any issue or concern, welcome to contact us via: support@vingli.com Let us know if the product damaged or part missing, we are always here to help. If you like our product, please share your experience with us on Amazon! 1.