Specifications

Programming Smart Voice
Introduction
Smart Voice provides the ability to program voicemail via telephone DTMF.
Programming may be completed via a series of mailboxes designed to provide the installer with a menu
driven utility to easily configure the system.
Following is an explanation of the DTMF telephone programming. For detailed information on the
SCREENS programming interface, please reference the WIN
®
IVP Installation Manual
Configure System Date and Time
NOTE: Smart Voice synchronizes its clock based on the telephone system’s CPU.
The system date and time must be current for the system to operate properly. If the
system date and time is not set or the system has been reset, the following message plays:
“The current system date is invalid.”
Then, perform the following steps to set the system date and time.
Press [ICM] and dial the WIN
®
Smart Voice
“Please enter your password…”
Dial
* *
to return to the main greeting
“Hello, thank you for calling…”
Enter the System Access Code
WXY
9
WXY
9
WXY
9
“Please enter your User ID…”
Enter User ID
WXY
9
OPER
0
OPER
0
“Please enter the password for User ID 900”
Enter the Password
WXY
9
OPER
0
OPER
0
Press
1
to review the current date and time settings
Press
ABC
2
to change the current time.
“Enter the new time in 24-hour format…”