Specifications

Caller Identification
Smart Voice will collect the incoming Caller ID information of Callers who leave a message in a User’s
mailbox when Caller ID is present. When a User retrieves messages the Caller ID will be announced before
each message is played, press # to skip this information and proceed directly to the message.
When messages are retrieved from WIN
®
32 Button Display Telephones, the display will provide the Caller
ID of the calling party, or internal extension number, that left the message and the date and time stamp
indicating when Smart Voice recorded the message.
NOTE: Caller ID is an optional feature and must be configured by the Telephone System Installer.
NOTE: The Caller ID feature is only provided to WIN
®
32 Button Display Telephones.
EXT509/Dana
Date
Caller ID
Information
MSG
770-447-9555
WIN Communications
15-09:34
Time
02
Caller ID Callback
While listening to a message, and while Caller ID is displayed, the user may press an optional Caller ID
Callback button programmed on the digital telephone, to immediately return the call. Caller ID rules may be
set within the WIN
®
Telephone System for removing an area code or adding a “1” to long distance numbers.
Programming
All programming for this feature is done in the telephone system. Once programmed the feature is
automatic.
KEY
Use the KEY command to add KEY ID 50: VCBK to a key on the display
station. One VCBK key is allowed per display station
CIDC
Use the CIDC command to build area code rules for removing or retaining area
codes when using the VCBK key.