Specifications

Programming
NOTE: Smart Keys require the permanent use of feature keys 1 – 6 (the top row). These keys will
be programmed as Smart Keys and cannot be used for any other function.
Telephone System Programming:
Software Required: V9.017
Hardware Required: Smart Voice, 32D-TEL ONLY
Telephone System Programming:
STA Identify 32D-TEL Terminal Type
KEY Program VMCT+ Keys
Key 1: VMCT+ 1, Key 2: VMCT+ 2
Key 3: VMCT+ 3, Key 4: VMCT+ 4
Key 5: VMCT+ 5, Key 6: VMCT+ 6
Smart Voice Programming
No programming necessary, this feature is automatic
Usage
Refer to Addendum B, User Mode Menus for a schedule of all User Mode Menus along with a guide for
Smart key usage.
Smart Access Internal Login
When accessing Smart Voice from any internal extension the Smart Voice utilizes the Smart-Access feature.
Each time an internal extension places an intercom (ICM) call to the Smart Voice, Smart Voice initiates a
User Mode login for the calling extension. The calling User is then prompted to enter the password for the
User ID to complete the login to User Mode.
Note: Should you wish to check your messages from an internal extension other than your own,
press ** to return to the Main Greeting and follow the instructions for an outside login.
Auto Configuration
Smart Voice uses digital integration features to automatically build a normal user mailbox for every physical
extension within the telephone system. This feature is automatically activated each time that Smart Voice is
power reset.