User's Manual
3
Important Safety Precautions
Always follow these basic safety precautions when using your Digital Picture Frame. This will
reduce the risk of fire, electric shock, and inj ury.
Warning:
To
reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
Warning:
To
prevent the risk of electric shock, do not remove the cover. There are no user-
serviceable parts inside. Refer all servicing to qualified personnel.
The Digital Picture Frame
is
for indoor use only.
Unplug the Digital
Picture Frame before performing care and maintenance.
Do not block the ventilation holes on the back of the Digital Picture Frame at any time.
Keep your Digital Picture Frame out of direct sunlight and heat sources.
Protect the power cord. Route power cords so that they are not likely to be walked on or
pinched by items placed on or against them. Pay particular attention to the point where the
cord
is
attached to the Digital Picture Frame.
Only use the AC adapter included with the Digital Picture Frame. Using any other power
adapter will void your warran
ty.
Unplug the power cord from the outlet when the unit
is
not in use.
Cleaning the LCD Screen
Treat the screen gently .
To
clean fingerprints or dust from the LCD screen,
it
is
recommended to use a soft, non-abrasive
cloth such
as
a camera lens cloth to clean the LCD screen.
If you use a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the LCD
screen. Clean the LCD screen with cleaning cloth moistened with the liquid.
Cleaning the Digital Picture Frame
Clean the outer surface of the Digital Picture Frame (excluding the screen) with a soft cloth
dampened with water.