User's Manual

NOTE: The card will only fit in one direction; do not force it. The card should fit snugly
when properly inserted.
4. Slide the power switch to the “ON” position to turn the Digital Picture frame on. The
Digital Picture Frame will automatically start a slide show of the photos on the card.
5. To display photos individually, press the “EXIT” button to open the thumbnails screen.
Use the arrow buttons to choose a photo. Press the “PLAY” button (>/II) on top of
the Digital Picture Frame, or the “ENTER” button on the remote control.
NOTE: Pull the plastic tab sticking out of the remote control. It protects the battery and
the remote control with not work unless it is removed.
6. To restart the slide show, press the “PLAY” button(>/II) again or press the slide
show button on the remote control.
Using the Control Buttons and Remote Control
You can use all of the Digital Picture Frame’s features with either the buttons on top of
the frame or using the remote control.
Using the Control Buttons
The control buttons are located on top of the Digital Picture Frame. Their basic
functions are the same no matter what the current mode is.
Button Action
<< Move the selection up or left, display the previous
photo, or select the previous file.
>II Select the highlighted option, start a slide show,
pause or play.
>> Move the selection down or right, display the next
photo or select the next file.
EXIT Exit the current display or go back a screen.
MENU Opens the OSD Menu MODE
Using the Remote Control
Installing and Replacing the Remote Control Battery
3