User's Manual

Copying the Displayed Photo to the Built-In Memory

Use the remote control to copy the displayed photo from the memory card to the built-

in memory. NOTE: This function is only available on models with built-in memory.

1. While vewing a photo, press the “SETUP” button.

2. Press the Up or Down arrow to select copy photo.

3. Press “ENTER”. A conﬁrmation message is displayed.

4. Press “EXIT” to close the menu.

Deleting the Displayed Photo

Using the remote control to delete the currently displayed photo.

1. While viewing a photo, press the “SETUP” button.

2. Press the Up or Down arrow to select Delete Photo

3. Press “ENTER” and conﬁrm the deletion.

CAUTION: The photo will be deleted immediately; you can not recover deleted photos.

4. Press “EXIT” to close the menu.

NOTE: You can also delete photos using the computer when the Digital Picture Frame

is connected to a computer. Simply delete unwanted ﬁles or photos off of the

internal memory (if available).

Adjusting the LCD Color

Choose this option to adjust the Brightness, Contrast, and color of the LCD display

while viewing a picture.

1. Press the “SETUP” button.

2. Press the “UP” or “DOWN” arrow to select adjust LCD color.

3. Press “ENTER”. A second menu should open.

4. Use the arrow buttons to select an option to adjust

5. When the display looks the way you want it to, press “EXIT” to close the menu.