User's Manual

This screen shows thumbnail versions of all photos on the selected memory source; up

to 6 photos are displayed at a time. Use this screen to select a single photo to display,

or to start a slide show of all of the photos.

1. Press the arrow buttons on the remote control or on the Digital Picture Frame until

the desired photo is highlighted. The photo’s ﬁlename is displayed at the top of the

screen.

2. Press the “SLIDE SHOW” button to start a slide show.

3. To stop the slide show and return to the thumbnail screen, press the “EXIT” button.

Displaying a Single Photo

1. With the thumbnails screen displayed, press “ENTER” to display the selected photo

on the full screen.

2. Press the “LEFT” arrow to return to the previous photo.

3. Press the “RIGHT” arrow to display the next photo.

4. To stop the display and return to the thumbnail screen, press the “EXIT” button.

Controlling the Slide Show and Photo

The Digital Photo Frame provides many options for customizing the display and

managing ﬁles. These options are available when viewing the photos only.

Rotating a Photo

You can rotate a photo displayed full-screen using the remote control. Press the

“ROTATE” button to rotate the photo 90 degrees counterclockwise.

Enlarging a Photo

To magnify a photo displayed full-screen, press the “ZOOM” button.

The photo doubles in size each time you press the button until it is 16x its normal •

size. Then it will return to normal size

While the photo is in enlarged, use the arrow buttons to move the photos so you •

can see the portions that aren’t currently available.

Thumbnail Screen