User's Manual

FUNCTIONS 04
ON / OFF BUTTON
MICRO-USB
CONNECTOR
Switch ON / OFF
1
BATTERY
2
SWITCH ON/OFF THE DEVICE
3
ON / OFF BUTTONON / OFF BUTTON
MICRO-USBMICRO-USB
CONNECTORCONNECTOR
Switch ON / OFF
LED COLOR CHART
STATE
BLINKING
Booting Wimu Ready
Logger
GPS fix / ANT+ Connect
FLASHING
-Slow- -Fast-
To charge the battery of the
device from AC adapter and
to load data
WIMU PRO has to be fully charged before starting any activity. Be sure the red LED from the lateral is turn off
(it will indicate the battery is fully charge). If we start a session without the enough battery charge, we risk not
recording the full session.
1. ON Press the button until a blue light flashes.
It’s recommended to place the device horizontally
(in the floor, i.e.) and away from vibrations during the first 30 sec. it’s on. WIMU
PRO uses this period of time to take references.
2. OFF Press the button 3 in quick sucession (less than 1 second)
STARTING PROCEDURE
4
In 30 seconds, aprox. you will see a BLUE LED
flashing, then a blue LED will flash quicker.
That means that WIMU PRO is ready to be used.
LOGGING
5
To start collecting data, we have to press and hold the button for 1 second.
Then a flashing is displayed followed for a red led blinking. Remember, the red led
indicates the session is being recorded into the device
PLACE OF WIMU PRO
6
Place the device into the sport vest as
seeing in the picture