User Manual

Installation Instructions

Thank you for your interest in Wimberley products. If you have any questions or comments feel free to contact us.

Using the AP-7 with your Wimberley Products:

The AP-7 mounts natively to the M3 (a component in the F-1, F-4,

F-6, and F-9 Brackets. It is designed to lock into the M3’s recessed

flash mount without the need for using the anti-rotation set screw.

Using the AP-7 with a 3rd Party Flash Bracket:

The AP-7 has been designed to be compatible with popular

economy Flash Brackets such as those made by Stroboframe,

Vello and others. Use set screw to lock rotation.

Using the AP-7 with other standard 1/4-20 hardware

The AP-7 works with a large array of 1/4-20 mounting applications.

We suggest that you use the

anti-rotation set screw when

attaching the cold shoe to the

stud on your M4.

Please note however that the

set screw will mar the surface

slightly.

Light Stand Adapter

Use the anti-rotation set screw to

prevent loosening by rotation.

*It is normal for there to be a gap between the lower

channel of the M-3 and the cold shoe. There is no loss of

thread engagement in this orientation

The Cold shoe may be mounted with

the knob in Left or Right orientation.

1/4-20 Accessory Cold

Shoe Plate adapter

Macro

Bracket

(M-4)

Loosen knob so that ball and

thumbscrew can spin freely

when attaching the stud to

your shoe cord or other device

A thumb screw has been included

to allow tool free installation

in the field for this application.

Spring Clamp

Accessory arm