User Manual

79
/
87
l
Appendix A: WIMAN Hardware
Hybrid cable Ethernet 2 (H2-ETH-25)
This hybrid cable is used as internal terminal cable with radio
tower installations or installation of the WIMAN on a rooftop.
The 25-pin SubD (male) link is connected to the data cable
(12x2), which leads from the WIMAN (outdoor) to the inward.
The further interfaces correspond to those of the hybrid cable
Type Ethernet 1.
SubD 25
male
S 25
4 x 0,15 mm², shielded, paired
5 x 0,15 mm²
3 x 0,15 mm², shielded
300 mm
S 9
SubD 9
female
with nuts
RJ45,
female
DIN Renk, 3 pin,
180 de
g
rees
,
male
2 mm
6 mm
Date: 10. July 2000
Hybrid cable Ethernet 3 (H3-ETH-37EXT)
This hybrid cable serves for the link of the WIMAN to the local
Ethernet. The current supply lines of the WIMAN are already
integrated in this cable. This cable can be used only together
with the link port HA-ETH-45.
S 37
SubD 37
female
25 m
RJ45 male
incl. protective cap
Cat 5, STP