User Manual

41
/
87
l
3 Configuration of the WIMAN radio modem
Enter password:
4.
Type in the new password.
Note:
Keep in mind that the password is case-sensitive
If a password is already set it will be overwritten.
Each entered character is shown as a „* on the screen.
The new password is saved in the new configuration and is
not yet active.
5.
Type in
exit
and leave the configuration mode (see
page 27).
6.
Proceed as shown in chapter 3.4.1 on page 36.
3.5.2 To delete a Password for the Authorization Level
one
To delete a password for authorization level one:
1.
Access the command line prompt of the authorization level
one.
The display will show the following:
Enter password: ****
Type in the required password. Remember that passwords
are case-sensitive.
The command-line prompt appears, for example:
WIMAN II >
Information:
The following instruction can be issued likewise from all
higher authorization levels.
2.
Change from the command mode of authorization level one
(indicated by the character " > " at the end of the command
line prompt) into the configuration mode by input of the
command
config
.
The command prompt of the configuration-mode appears:
WIMAN-II (config) >
3.
Type in the command
del passwd console
and press
ENTER
.
The former password is now deleted in the new configura-
tion.