User Manual
2 The WIMAN Command Line Level
30 / 87
2.6.3 General instructions
The instruction
Help
displays a summarized list of instructions.
The output on the command line level appears as follows:
WIMAN_Star # help
WIMAN II Wireless Data Communication Equipment
(c) 1999-2000 ALTVATER AIRDATA Systems GmbH & Co. KG, Bad Rappenau Germany
Built-In shell commands:
config - enter config mode
clear - clears a VT 100 screen
clear stat <type> - clears the statistic <type>
exit - exit configuration shell
export - export configuration
help - display these few helpful help lines
reset - reset unit
save - save running config to boot config
show - display running config and differences to boot config
show <regex> - display parameter(s) matching <regex>
stat <type> - display statistic information of <type>
swupdate <swlst> - get software update list <swlst> from TFTP Server
How to use command line editing, the shell history function and
the syntax of a valid <regexp>, please see the user's manual.
Figure 7 Help display output
The input of a valid parameter name alone leads to textual in-
formation available for this parameter. The admissible scope for
this parameter is displayed and the factory-installed preset value
are displayed, too.
The command CLEAR deletes the display on the command line
level of the respective terminal program (e.g. Telix or telnet
window).
The instruction
rese
t restarts the WIMAN (Hardware reset).
<parname>
reset
Help
clear