User Manual

2 The WIMAN Command Line Level
21
/
87
l
The parameter MaxNodeId determines the maximum number of
devices that are connected to a STAR.
Authorization Level: 2
Preset value: 1
Scope: 1 … 250
The parameter
Location
can be edited freely to determine the lo-
cation of the IWMAN radio modem, e.g.
Water_Tower01
or
rooftop
.
Authorization Level: 2
Preset value: default-location
Scope: No value
2.5.2 Parameter for the Serial Configuration Interface
The following parameters serve for the communication with the
serial configuration interface and are important for the correct
communication with the command line level.
The parameter
ConBaudrate
determines the Baud rate that can
be transferred over the RS-232-interface for configuring the
WIMAN.
Authorization Level: 1
Preset value: 9600
Scope: 300, 1200, 2400, 4800, 9600,
19200, 38400, 57600
The Parameter
ConDataBit
determines the length of the data bits
when transferring data over the RS 232-interface.
Authorization Level: 2
Preset value: 8
Scope: 7, 8
The parameter
ConHandShake
determines the handshaking
mode during a transfer on RS-232-interface. It can be selected
between a software-controlled handshaking and no handshaking.
With software-controlled handshaking the control sequences
Xon and Xoff are used.
Authorization Level: 2
Preset value: soft
Scope: soft, none (no handshaking)
ConBaudrate
ConDataBit
ConHandShake
Location
MaxNodeId