User Manual

2 The WIMAN Command Line Level
27 / 90l
The command Del Config enables the factory-installed preset
parameter-values to be transferred from the non-volatile con-
figuration to the new configuration. All modifications entered
before will be overwritten. This command can be given in con-
figuration mode only.
The command Del < paraname > enables a transferring of the
factory-installed preset parameter-value for the parameter de-
fined in < parname > from the non-volatile configuration into
the new configuration. All modifications of < parname > are
overwritten with defined parameters. In contrast to the instruc-
tion Del Config, it is possible to overwrite directed parameters
with the factory-installed defaults. This instruction can be issued
in the configuration mode only.
The command exit enables you to leave the configuration mode
or the command mode.
When leaving the config mode after having changed at least one
parameter, you will be asked whether these modifications should
be made the present configuration.
You now have the choice to:
• Make the modifications the present configuration and leave
the config mode by entering ‘y’,
• Discard the modifications to the present configuration and
leave the config-mode by entering ‘n’, or,
• stay in configuration mode and make the modifications only
the new configuration by entering ‘c’.
When leaving the command mode after having changed at least
one parameter (at least one parameter was modified in the con-
figuration mode and the modification was made the present con-
figuration), You will also be asked if these modifications are to
be considered with the next restart (They will be transferred into
the non-volatile configuration).
You now have the choice to:
• transfer the modifications to the non-volatile configuration
and leave the command mode by entering ‘y’,
• discard all modifications made and leave the command
mode by entering ‘n’ or
• stay in the command mode and keep the modification of the
parameters exclusively as present configuration by entering
‘c’.
Exit
Del <paraname>
Del Config