Datasheet

ManualsBrandsWima ManualsCapacitorsFoil capacitor assortment, MKS

08.11

Test specifications:

In accordance with IEC 60384-2

and EN 130 400

Test voltage: 1.6 U

, 2 sec.

Voltage derating:

A voltage derating factor of 1.25 % per K

must be applied from +85+ C for DC

voltages and from +75+ C for AC

voltages

Reliability:

Operational life  300 000 hours

Failure rate  2 fit (0.5 x U

and 40) C)

Mechanical Tests

Pull test on pins:

10 N in direction of pins according to

IEC 60068-2-21

Vibration:

6 hours at 10 ... 2000 Hz and 0.75 mm

displacement amplitude or 10 g in

accordance with IEC 60068-2-6

Low air density:

1kPa = 10 mbar in accordance with

IEC 60068-2-13

Bump test:

4000 bumps at 390 m/sec

accordance with IEC 60068-2-29

Packing

Available taped and reeled.

Detailed taping information and graphs

at the end of the catalogue.

For further details and graphs please

refer to Technical Information.

Capacitance range:

0.01 mF to 10 mF (E12-values on request)

Rated voltages:

50 VDC, 63 VDC, 100 VDC, 250 VDC,

400 VDC, 630 VDC

Capacitance tolerances:

±20%, ±10%, ±5%

Operating temperature range:

–55+ C to +100+ C (+125° C available

subject to special enguiry)

Climatic test category:

55/100/21 in accordance with IEC

Insulation resistance at +20+ C:

test

C  0.33 mF 0.33 mF < C  10 mF

50 VDC 10 V

5 x 10

M¸ (mean value: 3 x 10

M¸) 1000 sec (M¸ x mF) (mean value: 3000 sec)

63 VDC 50 V

1 x 10

M¸ (mean value: 5 x 10

M¸) 1250 sec (M¸ x mF) (mean value: 3000 sec)

100 VDC 100 V

1.5 x 10

M¸ (mean value: 1 x 10

M¸) 3000 sec (M¸ x mF) (mean value: 6000 sec)

Measuring time: 1 min.

Dissipation factors at + 20) C: tan d

at f C  0.1 mF 0.1 mF < C  1.0 mF C > 1.0 mF

1 kHz

 8 x 10

-3

 8 x 10

-3

 10 x 10

-3

10 kHz

 15 x 10

-3

 15 x 10

-3

–

100 kHz

 30 x 10

-3

– –

Maximum pulse rise time: for pulses equal to the rated voltage

Capacitance

Pulse rise time V/

msec

max. operation/test

50 VDC 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC

0.01 ... 0.022 – 35/350 35/350 50/500 80/800 110/1100

0.033 ... 0.068 – 20/200 25/250 50/500 80/800 90/900

0.1 ... 0.47 10/100 15/150 20/200 50/500 80/800 –

0.68 ... 1.0 8/80 12/120 15/150 25/250 – –

1.5 ... 3.3 8/80 7.5/75 10/100 – – –

4.7 5/50 5/50 – – – –

6.8 3/30 3/30 – – – –

10 2.5/25 – – – – –

WIMA MKS 2

Metallized Polyester (PET)

Capacitors in PCM 5 mm

Special Features Electrical Data

˜ High volume/capacitance ratio

˜ Self-healing

˜ According to RoHS 2002/95/EC

Typical Applications

For general DC-applications e.g.

˜ By-pass

˜ Blocking

˜ Coupling and decoupling

˜ Timing

Construction

Dielectric:

Polyethylene-terephthalate (PET) film

Capacitor electrodes:

Vacuum-deposited

Internal construction:

Plastic film

Vacuum-deposited

electrode

Metal contact layer

(schoopage)

Terminating wire

Encapsulation:

Solvent-resistant, flame-retardant plastic

case with epoxy resin seal, UL 94 V-0

Terminations:

Tinned wire.

Marking:

Colour: Red. Marking: Silver/White.

Epoxy resin seal: Red

Summary of content (8 pages)

PAGE 1
D WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features Electrical Data ˜ High volume/capacitance ratio ˜ Self-healing ˜ According to RoHS 2002/95/EC Typical Applications For general DC-applications e.g.
PAGE 2
D WIMA WIMA MKS FKP 42 Continuation General Data Capacitance 0.01 0.015 0.022 0.033 0.047 0.068 W H L 50 VDC/30 VAC* PCM** Part number W H 63 VDC/40 VAC* PCM** Part number L 2.5 6.5 2.5 6.5 2.5 6.5 2.5 6.5 2.5 6.5 2.5 6.5 7.2 7.2 7.2 7.2 7.2 7.2 5 5 5 5 5 5 MKS2C021001A00_ _ _ _ MKS2C021501A00_ _ _ _ MKS2C022201A00_ _ _ _ MKS2C023301A00_ _ _ _ MKS2C024701A00_ _ _ _ MKS2C026801A00_ _ _ _ 0.1 mF 0.15 „ 0.22 „ 0.33 „ 2.5 6.5 7.2 5 MKS2B033301A00_ _ _ _ 0.
PAGE 3
D WIMA WIMA MKS FKP 42 Continuation General Data 400 VDC/200 VAC* PCM** Part number Capacitance W 0.01 0.015 0.022 0.033 0.047 0.068 2.5 6.5 2.5 6.5 3.5 8.5 4.5 9.5 4.5 9.5 5.5 11.5 7.2 7.2 7.2 7.2 7.2 7.2 5 5 5 5 5 5 MKS2G021001A00_ _ _ _ MKS2G021501A00_ _ _ _ MKS2G022201C00_ _ _ _ MKS2G023301E00_ _ _ _ MKS2G024701E00_ _ _ _ MKS2G026801H00_ _ _ _ 7.2 8.5 11 7.2 7.2 7.2 5 5 5 MKS2G031001K00_ _ _ _ MKS2G031501M00_ _ _ _ MKS2G032201N00_ _ _ _ mF „ „ „ „ „ 0.1 mF 0.15 „ 0.
PAGE 4
D Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process Wave soldering T A preheating of through-hole WIMA capacitors is allowed for temperatures T max P 100 ° C. In practice a preheating duration of t P 5 min. has been proven to be best.
PAGE 5
D Typical Dimensions for Taping Configuration Vh P P2 Diagram 1: PCM 2.5/5/7.5mm W W1 W0 H H1 W2 P1 D0 d P t F P0 H1 P P1 H P1 d d P0 P2 F Diagram 2: PCM 10/15 mm Diagram 3: PCM 22.5 and 27.5*mm *PCM 27.5 taping possible with two feed holes between components Designation Carrier tape width Dimensions for Radial Taping Symbol PCM 2.5 taping W P0 P2 F 18.0 p0.5 PCM 5 taping PCM 7.5 taping PCM 10 taping* PCM 15 taping* PCM 22.5 taping PCM 27.5 taping 18.0 p0.5 18.
PAGE 6
D Packing Quantities for Capacitors with Radial Pins in PCM 2.5 mm to 22.5 mm Size PCM 2.5 mm 5 mm 7.5 mm 10 mm 15 mm 22.5 mm W 2.5 3 3.8 4.6 5.5 2.5 3 3.5 4.5 4.5 5 5.5 5.5 6.5 7.2 7.2 8.5 8.5 11 2,5 3 4 4.5 5 5.7 7.2 3 4 4 4 5 5 6 6 8 5 5 6 6 7 7 8 8 9 9 10 11 5 6 7 8 8.5 10 10.5 10.5 11 12 H 7 7.5 8.5 9 10 6.5 7.5 8.5 6 9.5 10 7 11.5 8 8.5 13 10 14 16 7 8.5 9 9.5 10.5 12.5 12.5 9 8.5 9 9.5 10 11 12 12.5 12 11 13 12.5 14 14 15 15 17 14 16 18 14 14 15 16.5 20 18.5 22 19 20.5 21 24 bulk L 4.6 4.
PAGE 7
D Packing Units Quantities for Taped for Capacitors Capacitorswith with Radial Radial Pins in Leads PCM 2.5 mm to 22.5 mm Size PCM 27.5 mm 37.5 mm 48.5 mm 52.5 mm W 9 11 13 13 15 15 17 17 19 20 20 9 11 13 15 17 19 20 24 31 35 40 19 23 27 33 37 35 45 45 H 19 21 24 25 26 26 29 34.5 30 32 39.5 19 22 24 26 29 32 39.5 45.5 46 50 55 31 34 37.5 48 54 50 55 65 bulk L 31.5 31.5 31.5 33 31.5 33 31.5 31.5 31.5 33 31.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.
PAGE 8
D WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: Field 1 - 4: Type description Field 5 - 6: Rated voltage Field 7 - 10: Capacitance Field 11 - 12: Size and PCM Field 13 - 14: Special features (e.g. Snubber versions) Field 15: Capacitance tolerance Field 16: Packing Field 17 - 18: Lead length (untaped) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D 20 % bulk MKS 2 07.