Datasheet

ManualsBrandsWima ManualsCapacitorsCapacitor, 22nF, 63VAC, 100VDC, 20%

06.05

Polyester (PET) Film and Foil

Capacitors for Pulse Applications

PCM 7.5 mm to 15 mm

Special Features Electrical Data

WIMA FKS 3

˜ Pulse duty construction

˜ According to RoHS 2002/95/EC

Typical Applications

For general DC-applications e.g.

˜ Coupling

˜ Decoupling

Construction

Dielectric:

Polyethylene-terephthalate (PET) film

Capacitor electrodes:

Metal foil

Internal construction:

Plastic film

Metal foil electrode

Terminating wire

Encapsulation:

Solvent-resistant, flame-retardent plastic

case with epoxy resin seal, UL 94 V-0

Terminations:

Tinned wire.

Marking:

Colour: Red. Marking: Black.

Epoxy resin seal: Yellow.

Capacitance range:

1000 pF to 0.22 m F (E12-values on request)

Rated voltages:

100 VDC, 250 VDC, 400 VDC, 630 VDC

Capacitance tolerances:

± 20%, ±10%, ±5%,

Operating temperature range:

–55+ C to +100+ C

Test specifications:

In accordance with IEC 60384-11

and EN 130 100

Climatic test category:

55/100/56 in accordance with IEC

Insulation resistance at +20+ C:

 3 x 10

M¸

(mean value: 5 x 10

M¸)

Measuring voltage: 100 V/1 min.

Test voltage: 2 U

, 2 sec.

Maximum pulse rise time:

1000 V/

m sec for pulses equal to the

rated voltage

Dissipation factors at +20+ C: tan d

at f

C0.01mF

0.01 mF<C0.22 mF

1 kHz  8 x 10

-3

 8 x 10

-3

10 kHz  15 x 10

-3

 20 x 10

-3

100 kHz  20 x 10

-3

 25 x 10

-3

Voltage derating:

A voltage derating factor of 1.25 % per K

must be applied from +85+ C for DC

voltages and from +75+ C for AC

voltages.

Reliability:

Operational life > 300 000 hours

Failure rate < 5 fit (0.5 x U

and 40+ C)

Mechanical Tests

Pull test on leads:

10 N in direction of leads according to

IEC 60068-2-21

Vibration:

6 hours at 10 ... 2000 Hz and 0.75 mm

displacement amplitude or 10 g in

accordance with IEC 60068-2-6

Low air density:

1kPa = 10 mbar in accordance with

IEC 60068-2-13

Bump test:

4000 bumps at 390 m/sec

accordance with IEC 60068-2-29

Packing

Available taped and reeled.

Detailed taping information and graphs

at the end of the catalogue.

For further details and graphs please

refer to Technical Information.

Summary of content (4 pages)

PAGE 1
D WIMA FKS 3 Polyester (PET) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Electrical Data ˜ Pulse duty construction ˜ According to RoHS 2002/95/EC Typical Applications For general DC-applications e.g. ˜ Coupling ˜ Decoupling Construction Dielectric: Polyethylene-terephthalate (PET) film Capacitor electrodes: Metal foil Internal construction: Plastic film Metal foil electrode Capacitance range: 1000 pF to 0.
PAGE 2
D WIMA FKS 3 Continuation General Data Capacitance 1000 1500 2200 3300 4700 pF „ „ „ „ W 100 VDC/63 VAC* H L PCM** 3 3 3 3 3 8.5 8.5 8.5 8.5 8.5 10 10 10 10 10 7.5 7.5 7.5 7.5 7.5 6800 „ 3 8.5 10 7.5 0.01 mF 0.033 „ 0.047 „ 0.068 „ 3 3 3 3 3 3 4 4 5 8.5 9 8.5 9 8.5 9 9.5 9.5 11 10 13 10 13 10 13 13 13 13 0.1 mF 0.15 „ 0.22 „ 6 7 8 12 14 15 13 18 18 0.015 „ 0.022 „ W 250 VDC/160 VAC* H L PCM** W 400 VDC/250 VAC* H L PCM** W 3 3 3 3 3 3 3 3 8.5 8.5 8.5 8.5 8.5 9 8.
PAGE 3
D Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process Wave soldering T A preheating of through-hole WIMA capacitors is allowed for temperatures T max < 100 ° C. In practice a preheating duration of t < 5 min. has been proven to be best.
PAGE 4
D Typical Dimensions for Taping Configuration )h P P2 Diagram 1: PCM 2.5/5/7.5mm W W1 W0 H H1 W2 P1 D0 d P t F P0 H1 P P1 H P1 d d P0 P2 F P0 P2 F Diagram 2: PCM 10/15 mm Diagram 3: PCM 22.5 and 27.5*mm *PCM 27.5 taping possible with two feed holes between components Dimensions for Radial Taping Symbol PCM 2.5 taping PCM 5 taping PCM 7.5 taping PCM 10 taping* PCM 15 taping* PCM 22.5 taping PCM 27.5 taping W 18.0 p0.5 18.0 p0.5 18.0 p0.5 18.0 p0.5 18.0 p0.5 18.0 p0.