Datasheet

ManualsBrandsWima ManualsCapacitorsCapacitor, Radial, 4.7nF, 40VAC, 63VDC, 2.5%

08.11

Capacitance range:

33 pF to 0.033 mF (E12-values on request)

Rated voltages:

63 VDC, 100 VDC, 250 VDC, 400 VDC,

630 VDC, 800 VDC, 1000 VDC

Capacitance tolerances:

±10%, ±5%, ±2.5% (±2%, ±1.5% or ±1%

available as precision capacitors subject

to special enquiry)

Operating temperature range:

–55+ C to +100+ C

Test specifications:

In accordance with IEC 60384-13

and EN 131 800

Climatic test category:

55/100/56 in accordance with IEC

Insulation resistance at +20+ C:

 5 x 10

M¸

(mean value: 1 x 10

M¸)

Measuring voltage:

= 63 V: U

test

= 50 V/1 min.

 100 V: U

test

= 100 V/1 min.

Dissipation factors at +20) C: tan d

at f C  1000 pF 1000 pF < C  4700 pF C > 4700 pF

1 kHz

 3 x 10

-4

 4 x 10

-4

 4 x 10

-4

10 kHz

 3 x 10

-4

 4 x 10

-4

 4 x 10

-4

100 kHz

 4 x 10

-4

 5 x 10

-4

–

1 MHz

 10 x 10

-4

– –

WIMA FKP 2

Polypropylene (PP) Film and Foil

Capacitors for Pulse Applications

in PCM 5 mm

Special Features Electrical Data

˜ Pulse duty construction

˜ Close tolerances up to ±2.5 %

(

±1 % on request)

˜ Very low dissipation factor

˜ Negative capacitance change

versus temperature

˜ Very low dielectric absorption

˜ According to RoHS 2002/95/EC

Typical Applications

For high frequency applications e.g.

˜ Sample and hold

˜ Timing

˜ LC-Filtering

˜ Oscillating circuits

˜ Audio equipment

Construction

Dielectric:

Polypropylene (PP) film

Capacitor electrodes:

Metal foil

Internal construction:

Plastic film

Metal foil electrode

Terminating wire

Encapsulation:

Solvent-resistant, flame-retardant plastic

case with epoxy resin seal, UL 94 V-0

Terminations:

Tinned wire.

Marking:

Colour: Red. Marking: Black.

Epoxy resin seal: Yellow

Test voltage: 2 U

, 2 sec.

Maximum pulse rise time:

1000 V/msec for pulses equal to the

rated voltage

Dielectric absorption:

0.05%

Temperature coefficient:

–200 x 10

-6

/+ C (typical)

Voltage derating:

A voltage derating factor of 1.35 % per K

must be applied from +85+ C for DC

voltages and from +75+ C for AC

voltages

Reliability:

Operational life  300 000 hours

Failure rate  5 fit (0.5 x U

and 40+ C)

Mechanical Tests

Pull test on pins:

10 N in direction of pins according to

IEC 60068-2-21

Vibration:

6 hours at 10 ... 2000 Hz and 0.75 mm

displacement amplitude or 10 g in

accordance with IEC 60068-2-6

Low air density:

1kPa = 10 mbar in accordance with

IEC 60068-2-13

Bump test:

4000 bumps at 390 m/sec

accordance with IEC 60068-2-29

Packing

Available taped and reeled.

Detailed taping information and graphs

at the end of the catalogue.

For further details and graphs please

refer to Technical Information.

Summary of content (8 pages)

PAGE 1
D WIMA FKP 2 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Electrical Data ˜ Pulse duty construction ˜ Close tolerances up to ±2.5 % (±1 % on request) ˜ Very low dissipation factor ˜ Negative capacitance change versus temperature ˜ Very low dielectric absorption ˜ According to RoHS 2002/95/EC Typical Applications For high frequency applications e.g.
PAGE 2
D WIMA FKP 24 Continuation General Data 63 VDC/40 VAC* PCM** Part number 100 VDC/63 VAC* PCM** Part number Capacitance W H L 100 150 220 330 470 680 pF „ „ „ „ „ 4.5 4.5 4.5 4.5 4.5 4.5 6 6 6 6 6 6 7.2 7.2 7.2 7.2 7.2 7.2 5 5 5 5 5 5 FKP2C001001D00_ _ _ _ FKP2C001501D00_ _ _ _ FKP2C002201D00_ _ _ _ FKP2C003301D00_ _ _ _ FKP2C004701D00_ _ _ _ FKP2C006801D00_ _ _ _ 4.5 6 4.5 6 4.5 6 4.5 6 4.5 6 4.5 6 7.2 7.2 7.2 7.2 7.2 7.
PAGE 3
D WIMA FKP 24 Continuation General Data 630 VDC/250 VAC* PCM** Part number 800 VDC/250 VAC* PCM** Part number Capacitance W 100 150 220 330 470 680 pF „ „ „ „ „ 4.5 6 4.5 6 4.5 6 4.5 6 4.5 6 4.5 6 7.2 7.2 7.2 7.2 7.2 7.2 5 5 5 5 5 5 FKP2J001001D00_ _ _ _ FKP2J001501D00_ _ _ _ FKP2J002201D00_ _ _ _ FKP2J003301D00_ _ _ _ FKP2J004701D00_ _ _ _ FKP2J006801D00_ _ _ _ 4.5 6 4.5 6 4.5 6 4.5 6 5.5 7 5.5 7 7.2 7.2 7.2 7.
PAGE 4
D Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process Wave soldering T A preheating of through-hole WIMA capacitors is allowed for temperatures T max P 100 ° C. In practice a preheating duration of t P 5 min. has been proven to be best.
PAGE 5
D Typical Dimensions for Taping Configuration Vh P P2 Diagram 1: PCM 2.5/5/7.5mm W W1 W0 H H1 W2 P1 D0 d P t F P0 H1 P P1 H P1 d d P0 P2 F Diagram 2: PCM 10/15 mm Diagram 3: PCM 22.5 and 27.5*mm *PCM 27.5 taping possible with two feed holes between components Designation Carrier tape width Dimensions for Radial Taping Symbol PCM 2.5 taping W P0 P2 F 18.0 p0.5 PCM 5 taping PCM 7.5 taping PCM 10 taping* PCM 15 taping* PCM 22.5 taping PCM 27.5 taping 18.0 p0.5 18.
PAGE 6
D Packing Quantities for Capacitors with Radial Pins in PCM 2.5 mm to 22.5 mm Size PCM 2.5 mm 5 mm 7.5 mm 10 mm 15 mm 22.5 mm W 2.5 3 3.8 4.6 5.5 2.5 3 3.5 4.5 4.5 5 5.5 5.5 6.5 7.2 7.2 8.5 8.5 11 2,5 3 4 4.5 5 5.7 7.2 3 4 4 4 5 5 6 6 8 5 5 6 6 7 7 8 8 9 9 10 11 5 6 7 8 8.5 10 10.5 10.5 11 12 H 7 7.5 8.5 9 10 6.5 7.5 8.5 6 9.5 10 7 11.5 8 8.5 13 10 14 16 7 8.5 9 9.5 10.5 12.5 12.5 9 8.5 9 9.5 10 11 12 12.5 12 11 13 12.5 14 14 15 15 17 14 16 18 14 14 15 16.5 20 18.5 22 19 20.5 21 24 bulk L 4.6 4.
PAGE 7
D Packing Units Quantities for Taped for Capacitors Capacitorswith with Radial Radial Pins in Leads PCM 2.5 mm to 22.5 mm Size PCM 27.5 mm 37.5 mm 48.5 mm 52.5 mm W 9 11 13 13 15 15 17 17 19 20 20 9 11 13 15 17 19 20 24 31 35 40 19 23 27 33 37 35 45 45 H 19 21 24 25 26 26 29 34.5 30 32 39.5 19 22 24 26 29 32 39.5 45.5 46 50 55 31 34 37.5 48 54 50 55 65 bulk L 31.5 31.5 31.5 33 31.5 33 31.5 31.5 31.5 33 31.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.
PAGE 8
D WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: Field 1 - 4: Type description Field 5 - 6: Rated voltage Field 7 - 10: Capacitance Field 11 - 12: Size and PCM Field 13 - 14: Special features (e.g. Snubber versions) Field 15: Capacitance tolerance Field 16: Packing Field 17 - 18: Lead length (untaped) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D 20 % bulk MKS 2 07.