GAS PRO 6 BURNER GAS BARBECUE - OWNERS MANUAL Retain manual for future reference
PRO 6 BURNER GAS BARBECUE - OWNERS MANUAL We’d like to thank you for choosing a Wiltshire BAR-B gas barbecue. We believe that our barbecue will provide you with the many years of reliable service that you have come to expect of anything with the Wiltshire name on it. Please take the time to read these instructions thoroughly before use. These will not only help you get the most from your new barbecue, but will ensure that you use the barbecue safely.
PARTS LIST ITEM DESCRIPTION QUANTITY 1 CART BOTTOM STRENGTHEN WELD 1 2 RIGID CASTER 3 PARTS LIST PICTURE ITEM DESCRIPTION QUANTITY 24 DRAWER VERTICAL SUPPORT 2 2 25 DRAWER HORIZONTAL SUPPORT 4 SWIVEL CASTER 2 26 OIL CUP 1 4 CART LEFT PANEL WELD 1 27 FLEXIBLE GAS HOSE FIXED 1 5 CART RIGHT PANEL WELD 1 28 DOOR AXIS SUPPORT-L 1 6 CART REAR PANEL 1 29 DOOR AXIS SUPPORT-R 1 7 GAS TANK TRAY 1 9 DRAWER 2 PICTURE FASTENERS ITEM DESCRIPTION QUANTITY 10 DOOR UPPER 1
SETTING UP THE BARBEQUE THIS APPLIANCE SHALL ONLY BE USED IN AN ABOVE GROUND OPEN AIR SITUATION WITH NATURAL VENTILATION, WITHOUT STAGNANT AREAS, WHERE GAS LEAKAGE AND PRODUCTS OF COMBUSTION ARE RAPIDLY DISPERSED BY WIND AND NATURAL CONVECTION 1. POSITIONING • Please make sure that the barbeque is NOT positioned underneath any combustible material or surface. • There MUST be a clearance of at least 250mm from the sides of the Barbeque to any combustible materials or surfaces.
ASSEMBLY & INSTALLATION PLEASE ENSURE THAT YOU HAVE ALL PARTS AND FASTENERS BEFORE BEGINNING ASSEMBLY. STEP 1 ATTACH CASTERS 1. Turn Cart Bottom Plate Assembly (1) upside down. 2. Align each caster on each of the cart bottom caster plates, as shown in diagram. 3. Thread 4xBolt (A) first with Spring Washer (B) and then Flat Washer (C). 4. Screw through the caster hole into the cart bottom caster plates. 5.
STEP 4 ATTACH GAS TANK TRAY AND MAGNET 1. Align Gas Tank Tray (7) pre-drilled holes to the right of Cart Bottom pre-drilled holes, as shown in diagram. 2. Thread 4xBolt (A) first with Spring Washer (B) and then Flat Washer (C). 3. Screw through Gas Tank Tray (7) into Cart Bottom Plate Assembly (1). A M6X12...4 PCS B M6 SPRING WASHER...4 PCS C M6 FLAT WASHER...4 PCS STEP 5 ATTACH DRAWER VERTICAL AND HORIZONTAL SUPPORT TO CART 1.
STEP 6 ATTACH DOOR AND DOOR UPPER 1. Align Door Upper (10) between top of left and right panels pre-drilled holes and in front of both Drawer Vertical Support (24), as shown in diagram. 2. Thread 2xBolt (D) first with Spring Washer (B) and then Flat Washer (C) and lastly Door Axis Support-L (28) as shown in diagram. 3. Screw through Cart Left Panel (4) and Door Axis Support (28) into Door Upper (10), as shown in diagram. Keep the screw loose. 4. Repeat for right-hand side. 5.
STEP 8 ATTACH LEFT SIDE SHELF TO BODY & LID ASSEMBLY 1. Thread 2xBolts (E) through Spring Washer (B), Flat Washer (C), rear side of shelf into 1xSide Spacer Rear (16). 2. Thread 2xBolts (E) through Spring Washer (B), Flat Washer (C), front side of shelf into 1xSide Spacer Front (15). 3. Align Left Shelf Assembly (13) with Body & Lid Assembly (12) thread inserts. 4. Partially screw top rear and front bolts making sure bottom bolts stay aligned. Partially screw bottom bolts.
STEP 10 PLACEMENT OF SIDE BURNER ASSEMBLY AND SIDE GRILL 1. Thread side burner hose through hole in right-side Body & Lid Assembly (12) and place behind side burner fascia as shown in diagram. 2. Unscrew side burner hose nut and place valve nozzle end of hose through side burner bracket as shown in diagram (H View). 3. Secure in bracket with side burner hose nut, as shown in diagram (H View). NOTE: THIS IS A LEFT-HAND THREAD MEANING IT TIGHTENS IN AN ANTI-CLOCKWISE DIRECTION. 4.
STEP 12 PLACEMENT OF OIL CUP 1. Working from the back, slide Oil Cup (26) into the brackets under the Fat Tray, as shown in diagram. STEP 13 ATTACH FLEXIBLE GAS HOSE FIXED AND CONNECT GAS CYLINDER 1. Prior to fitting gas cylinder ensure the cart, shelves, body and lid are secure. 2. All fixings are tight. 3. Partially loosen bolts in Flexible Gas Hose Fixed (27) and position over main barbeque gas hose connection as shown in diagram. 4.
IMPORTANT HEALTH & SAFETY INFORMATION 1. WARNING FOR OUTDOOR USE ONLY! DO NOT USE INDOORS • Please read these instructions carefully prior to assembly and use. • Failure to follow these instructions could lead to serious injury and/or significant damage to property. • Do not start the barbeque if there is any doubt over the correct assembly, ignition, gas control or cooking of the unit. • These instructions should be retained for future reference. • For use with ULPG cylinder gas only.
LEAK TEST To test for leaks, turn on the gas bottle valve and apply soap suds to the areas shown. Watch carefully for any signs of bubbling, which indicate a gas leak. WARNING - The design of the barbeque is with one solid hotplate only. More than one solid hotplate will create a dangerous situation where the barbeque can overheat. - Remove all transit protection before using the barbeque SAI GLOBAL GSCS20247 Model - BGW6YA036B Gas Type - UNIVERSAL LPG Burner Injector Size - 0.
IGNITING CONNECT GAS BOTTLE: Use only an approved LPG tank. Check the tank for rust and other signs of corrosion. Check the hose and valve condition with each gas bottle change. Tightly screw the hose fitting into the tank outlet nozzle (remembering that this screws in anti-clockwise). To check for gas leaks, apply soap suds to all gas joints and check for bubbling that will indicating escaping gas. If you smell gas, but no leak can be found, don’t operate the barbecue. Contact an authorised technician.
MAINTENANCE There are a couple of maintenance procedures that you should carry out at least once a year. BURNER: Once a year, remove the burner and inspect it for any signs of blockage. If necessary, clear any obstructions with compressed air or short piece of stiff wire. Remove any rust and dirt with a wire brush. Replace the burner. GAS SUPPLY: Inspect the gas hose and fittings for signs of deterioration and replace if necessary.
WARRANTY YOUR WILTSHIRE BAR-B BARBECUE IS COVERED BY A MANUFACTURERS WARRANTY FOR 2 YEARS FROM THE DATE OF PURCHASE. Please keep your purchase receipt in a safe place. It is also a good idea to note the serial number (located on the rating label on the side of the firebox) on your receipt. Thankyou for purchasing one of our quality Wiltshire BAR-B BBQs. YOUR WILTSHIRE BAR-B BBQ IS COVERED AGAINST DEFECTS FOR A PERIOD OF 2 YEARS FOR PARTS AND LABOUR, REPAIR OR REPLACEMENT.
GAS CONTACT US Wiltshire is a brand of McPhersons Consumer Products. Australia: 105 Vanessa St, Kingsgrove, NSW 2208. New Zealand: 30 Highbrook Drive, East Tamaki, Auckland 2013. Singapore: 20 Toh Guan Road, #03-00 CJ GLS Building, Singapore 608839. www.wiltshirebbq.com.
