Specifications

Introduction
This manual includes operating and maintenanceinstructionsfor the Wilton Model 4103, 4106 and 4126AC
Square Wheel Belt Grinder. The manual also includes parts listings and illustrationsof replaceable parts.
Refer to Figures 1 and 2 for keyfeatures of the Square Wheel Belt Grinder.
Setup and Operation
The Square Wheel Belt Grinder can be mounted on a workbench or an optional pedestal. The grinder should be
secured to the work bench or pedestal using the four holes in the base of the grinder. If the pedestal is used, it in turn
should be anchored to the floor using the for holes in the base of the pedestal
Installationof Work Rest
The work rest mounts on the left side of the head casting. Attach the work rest using the socket head cap
screw provided with the machine.
The slot in the work rest has a lip against which the cap screw is tightened. Place the hole at the end of the
slot over the cap screw. Then slide the rest inward until the work rest is in position in front of the contact
wheel. Tighten the cap screw.
6
Contact
Wheel
Pedestal
'Z.. ]I
/
I
/
/@
, ~ <2J
".~
I
Figure 1: Square Wheel Grinder Features
(single speed)
Inverter
Belt Tracking
Adjustment
Pedestal
~~/~
I
Figure2: Square Wheel Grinder Features
(variable speed)