User Manual

ManualsBrandswiltec ManualsMetal Folderwiltec 61574 Manually Operated Sheet Metal Folder

Operation Manual

Sheet Metal Folder

61574













Summary of content (4 pages)

PAGE 1
Operation Manual Sheet Metal Folder 61574 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities, please contact us.
PAGE 2
The information contained in this document may alter at any time without previous notice. It is prohibited to copy or spread any parts of this document in any way without prior written allowance. All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
PAGE 3
Introduction Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients take some basic safety precautions when using this device. Please read the operation instructions carefully and make sure you have understood its content. Keep these operation instructions safe. Safety notes and warnings • • • • • • • • • • • • • • Keep your working area clean and tidy. Crowded and untidy work areas increase the danger of injury. Consider the conditions of your work space.
PAGE 4
Mounting and operating instructions • • • • • • • • • • • Attach the frame (1) to the workbench via 0.95 cm (⅜″) mounting bolts (not included in the delivery). Attach the handle balls (4) to the handle levers (3) and then attach the handle levers to the frame (see illustration). For an easier use, please use a scriber (not included in the delivery) to engrave a straight line into a metal sheet and be able to fold it afterwards.