SDS

Wilsonart H2O Adhesive
Safety Data Sheet
Prepared according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 01/14/2016 SDS# 16419 Version: 22
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product name
:
Wilsonart H2O Adhesive
Product form
:
Mixture
Other means of identification
:
H2O Adhesive - White or Green
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : Adhesive for laminate
1.3. Details of the supplier of the safety data sheet
Wilsonart LLC
P.O. Box 6110
Temple, TX 76503-6110
Information phone: [phone] (USA)
In Case of Emergency Contact CHEMTREC (International): 703-527-3887
1.4. Emergency telephone number
Emergency number : CHEMTREC: [phone]
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
GHS-US classification
Eye Irrit. 2A H319
2.2. Label elements
GHS-US labelling
Hazard pictograms (GHS-US)
:
GHS07
Signal word (GHS-US)
:
Warning
Hazard statements (GHS-US)
:
H319 - Causes serious eye irritation
Precautionary statements (GHS-US)
:
P264 - Wash hands, forearms and face thoroughly after handling
P280 - Wear protective gloves, eye protection, protective clothing
P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing
P337+P313 - If eye irritation persists: Get medical advice/attention
2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS-US)
No data available
SECTION 3: Composition/information on ingredients
3.1. Substance
Not applicable
3.2. Mixture
Name
Product identifier
%
Benzene, 1,1'-oxybis-, tetrapropylene derivatives, sulfonated,
sodium salts
(CAS No) 119345-04-9
0.1 - 1
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures general
:
If exposed or concerned, get medical attention/advice. Show this safety data sheet to the
doctor in attendance. Wash contaminated clothing before re-use. Never give anything to an
unconscious person.
First-aid measures after inhalation
:
IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. Get
medical attention if breathing is affected. If breathing is difficult, supply oxygen.
First-aid measures after skin contact
:
IF ON SKIN (or clothing): Remove affected clothing and wash all exposed skin with water for at
least 15 minutes. If irritation develops or persists, get medical attention.
12/11/2015 Wilsonart H2O Adhesive Page 1