SDS

Wilsonart 740A Adhesive
Safety Data Sheet
Prepared according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2017
Wilsonart 740A Adhesive
4/9
Isopentane (78-78-4)
ACGIH TWA (ppm)
600 ppm (listed under Pentane, all isomers)
Remark (OSHA)
OELs not established
Pentane (109-66-0)
ACGIH TWA (ppm)
600 ppm (listed under Pentane, all isomers)
OSHA PEL (TWA) (mg/m³)
2950 mg/m³
OSHA PEL (TWA) (ppm)
1000 ppm
Naphtha, petroleum, hydrotreated light (64742-49-0)
Remark (ACGIH)
OELs not established
Remark (OSHA)
OELs not established
Hexane (110-54-3)
ACGIH TWA (ppm)
50 ppm
OSHA PEL (TWA) (mg/m³)
1800 mg/m³
OSHA PEL (TWA) (ppm)
500 ppm
Toluene (108-88-3)
ACGIH TWA (ppm)
20 ppm
Remark (ACGIH)
Visual impair; female repro;
Acetone (67-64-1)
ACGIH TWA (ppm)
500 ppm
ACGIH STEL (ppm)
750 ppm
OSHA PEL (TWA) (mg/m³)
2400 mg/m³
OSHA PEL (TWA) (ppm)
1000 ppm
OSHA PEL (STEL) (mg/m³)
2400 mg/m³ (The acetone STEL does not apply to the
cellulose acetate fiber industry. It is in effect for all
other sectors)
OSHA PEL (STEL) (ppm)
1000 ppm
Propane (74-98-6)
ACGIH TWA (ppm)
1000 ppm (listed under Aliphatic hydrocarbon gases:
Alkane C1-4)
OSHA PEL (TWA) (mg/m³)
1800 mg/m³
OSHA PEL (TWA) (ppm)
1000 ppm
DNEL
>=
Dimethyl ether (115-10-6)
Remark (ACGIH)
OELs not established
Remark (OSHA)
OELs not established
8.2. Exposure controls
Appropriate engineering controls
:
Provide adequate general and local exhaust ventilation. Use process enclosures, local exhaust
ventilation, or other engineering controls to control airborne levels below recommended
exposure limits. Use explosion-proof equipment with flammable materials. Ensure adequate
ventilation, especially in confined areas.
Personal protective equipment
:
Safety glasses. Gloves. Protective clothing. Insufficient ventilation: wear respiratory protection.
Hand protection
:
Use gloves chemically resistant to this material when prolonged or repeated contact could
occur. Gloves should be classified under Standard EN 374 or ASTM F1296. Suggested glove
materials are: Neoprene, Nitrile/butadiene rubber, Polyethylene, Ethyl vinyl alcohol laminate,
PVC or vinyl.
Eye protection
:
Wear eye protection, including chemical splash goggles and a face shield when possibility
exists for eye contact due to spraying liquid or airborne particles.
Skin and body protection
:
Wear long sleeves, and chemically impervious PPE/coveralls to minimize bodily exposure.