Specification

Guide Specification
Revision: 10/19/2015 Section 06 0630 - 8
Decorative Plastic Laminate Resurfacing
E. Applications: Horizontal postformed surfaces.
F. Edging: Self-edged.
G. Finish: [Mirage -35] [Facet -45] [Glaze -55].
H. Color and Pattern: [_________________________].
I. Color and Pattern: Specified in SCHEDULE Article of this Section.
J. Color and Pattern: Indicated on Drawings.
K. Color and Pattern: Selected from manufacturer’s full range of available selections.
2.07 ACCESSORY MATERIALS
A. Substrate Repair Materials: Following products are acceptable for repairing damaged
high pressure decorative laminate or wood substrates:
1. J-B Weld
®
WoodWeld.
2. Elmer’s
®
Carpenter’s
®
Wood Filler.
3. Bondo
®
All-Purpose Putty.
B. Substrate Cleaning Materials: Following products are acceptable; do not use a cleaner
that will leave an oily residue and do not use to thin adhesive products:
1. Wilsonart
®
110 Adhesive Solvent.
2. Wilsonart
®
121 Adhesive Cleaner.
3. Wilsonart
®
130 Low VOC Adhesive Solvent.
4. Wilsonart
®
131 Adhesive Cleaner. OTC compliant.
5. Wilsonart
®
131A Adhesive Cleaner Aerosol. OTC compliant.
6. Windex
®
with ammonia.
7. Non-proprietary acetone, isopropyl alcohol, or denatured alcohol cleaning
material.
C. Self-Edging Adhesive: Wilsonart
®
30 PVA Yellow Wood Glue.
EDITING NOTE: If color and pattern are not specified above, delete and select one of the
following options.
EDITING NOTE: Select cleaning materials and self-edging adhesive material(s) to be used
for the project. Refer to the Laminate Design Detail Page on the Wilsonart website for
EDITING NOTE: Wilsonart RE-COVER Laminate is NOT recommended for kitchen
countertops adjacent to ranges or surface cooktops where temperatures may exceed 150 deg
F (66 deg C). Suitable installations are kitchen islands, bath vanities, and utility/work rooms.