Specification

Guide Specification
Revision: 10/19/2015 Section 06 0630 - 2
Decorative Plastic Laminate Resurfacing
D. Section 06 4219 - Plastic-Laminate-Clad Wood Paneling.
E. Section 08 1423.16 - Plastic-Laminate-Faced Wood Doors.
F. Section 10 2113.16 - Plastic-Laminate-Clad Toilet Compartments.
G. Section 12 3530.13 - Kitchen Casework.
H. Section 12 3623.13 - Plastic-Laminate-Clad Countertops.
1.03 REFERENCES
A. Reference Standards:
1. AWI: Architectural Woodwork Institute.
2. AWS: Architectural Woodwork Standards.
3. FSC: Forest Stewardship Council.
4. ISO: International Organization for Standardization.
5. ISO 9001: Quality Management Systems.
6. ISO 14001: Environmental Management Systems.
7. KCMA A161.1: Performance & Construction Standard for Kitchen and Vanity
Cabinets.
8. LEED: Leadership in Energy and Environmental Design.
9. NEMA LD-3: High Pressure Decorative Laminates.
10. OHSAS: Occupational Health and Safety Assessment Series.
11. OHSAS 18001: Occupational Health and Safety Management Systems.
12. SCAQMD Rule 1168: Adhesive and Sealant Applications.
13. SCS: SCS Global Services.
14. UL 2818: GREENGUARD Certification Program for Chemical Emissions for
Building Materials, Finishes and Furnishings.
1.04 SUBMITTALS
A. Submit under provisions of Section 01 3000 - Submittals.
B. Product Data: Submit the following:
1. Product data for each specified product. Include manufacturer’s technical data
sheets and published instruction instructions.
2. Safety Data Sheets (SDS).
C. Shop Drawings: Fully dimensioned shop drawings showing layouts and components,
including edge conditions, joinery, terminating conditions, substrate construction, and
cutouts and holes. Include elevations, section details, and large scale details. Indicate
color, pattern, and finish selections.
D. Samples: Selection and verification samples for each color, pattern, and finish required.
EDITING NOTE: Revise Reference Standards to suit Project requirements.