Specifications

1
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [e-mail] Hours: 7 am to 6 pm MST.
2
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [e-mail] Hours: 7 am to 6 pm MST.
Inside this Package
Accessories & Antenna Options
(sold separately)
Select a location to install the Signal Booster that is away from excessive heat, direct 1.
sunlight, moisture and that has proper ventilation. Do not place the Signal Booster in
an air-tight enclosure.
Select a location on the top of the structure to install the Outside Antenna. Use a cell 2.
phone in test mode to find the strongest signal from the cell tower. Visit
www.WilsonElectronics.com to find test mode function for your particular cell phone.
Run the Outside Antenna cable to the Signal Booster and attach it to the connector 3.
labeled “Outside Antenna.”
An external adapter is required to connect the cell phone or cellular data card to the 4.
Signal Booster. The external adapter plugs into the included antenna extension cable
and directly into a socket on the cellular device. Run the extension cable from the
external adapter and attach it to the connector labeled “cellular phone or data card” on
the Signal Booster.
Note: Be careful when plugging the connector in so as not to bend the center pins on
the connectors. Ensure all cables have a tight connection.
Before powering up the Signal Booster verify that both the Outside Antenna and the 5.
Inside Antenna are connected and check that all connections are tight. An AC surge
protector is recommended for all installations (not included).
Quick Installation Overview
The following steps provide a summary of the Signal Booster/antenna installation process.
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660.
Before Getting Started
This guide will help you properly install your Wilson Electronics Signal Booster. It is impor-
tant to read through all of the installation steps for your particular application prior to
installing any equipment. Read through the instructions, visualize where all the equipment
will need to be installed and do a soft installation before mounting any equipment. For further
assistance please call our Wilson Electronics Technical Support Team: 866-294-1660.
Installation Instructions for the Following Wilson Electronics
Signal Booster:
DataPro: FCC ID: PWO2B1225 IC: 4726A-2B1225 Model: 2B1225
The term “IC” before the radio certification number only signifies that Industry Canada
technical specifications were met.
Cellular
Modem
Outside
Antenna
Signal
Booster
Installation Diagram
(Figure 1)
NMO
Mount
(301104)
Magnet
Mount
(301125)
Trucker
Mount
(301101)
Mini
Magnet
(301126)
800/1900
MHz Omni-
Directional
Antenna
(301202)
Mounting Plate
(901138)
Lightning
Surge Protector
(859902)
Marine
Antenna
(301130)
700/800/900 MHz Multi-Band Yagi Cellular
Antenna (301111)
Yagi Antennas (adapters may be required)
Omni Directional Antennas (adapters may be required)
1900 MHz Yagi PCS Antenna (301124)
800 MHz Yagi Cellular Antenna (301129)
5V Power
Supply
(2D9969)
DataPro
Signal
Booster
6’ RG174
cable
(291141)
Powerstrip Surge Protector
Appearance of device and accessories may vary.
Accessories (adapters may be required)
Power
Supply