Owner`s manual
Speaker Cables
The high current input terminals located on the rear of your Center channel loud-
speaker are color coded with a small plastic plug, so that RED (marked “+”) corresponds to
positiveandBLACK(marked“-”)tonegative,common,orgroundontheamplifieroutput.
Be sure to connect the loudspeakers in phase with each other. We recommend the use of
the very highest quality loudspeaker cables, particularly those designed for high frequency
propagation correction and phase linearity. Beware of “zip cord” type speaker cables,
which will smear the sound and limit their effective bandwidth. Also, do not use braided
litz-type loudspeaker cables as they will cause an unnatural brightness to the sound, com-
promise sound staging performance, and may cause instability, oscillation, and damage in
wide bandwidth solid state amplifiers.
Spade Lugs
The spade lugs of some of the high quality cables often used with the Center channel
Fi gu re 19 – SPAd e lug ATTAC HM enT
W A T C H C e n T e r C H A n n e l S e r i e S 3 O W n e r ’ S M A n u A l
56
Wilson Audio Specialties