Owner`s manual

Section 11.2—Mounting Center Channel above Screen
Mounting the Center channel above a TV requires a custom made bracket. This brack-
et will support the weight of the Center channel and allow it to be rotated toward the
listening position (see Figure 20 below). This rotation will significantly improve the perfor-
mance of your Center channel, improving system integration, phase delay correction, and
providing a correct image height.
The custom made bracket must have 4 mounting holes as shown in Figure 21 (oppos-
ing page). These holes will allow the Center channel to be bolted to the mount. Make sure
that the holes go all the way through the bracket and that the locations are such that they
will allow a nut to be tightened to the bolt that is inserted through these holes.
Fi gu re 20 – MOunTi ng Cen Ter CHAn nel TO Ceil ing
uSer-Made cuStOM MOunting bracKet
center channel MOunt
angleS SpeaKer dOwn
center channel bOltS tO bracKet
via fOur 3/8-16 bOltS and nut
attached frOM inSide the SpeaKer
W A T C H C e n T e r C H A n n e l S e r i e S 3 O W n e r ’ S M A n u A l
100
Wilson Audio Specialties