Specifications

NAIROBI OPERATIONAL HUB
UNOPS Building, UN Lane, Off UN Avenue Tel: [phone]
P.O Box 783,Village Market, 00621 E-mail: [e-mail]
Nairobi, Kenya Website: www.unops.org
UNOPS is ISO 9001 certified
2.02 JUNCTION BOXES
The junction boxes shall be DP 250V or TP 415 with current rating as shown on
drawings or indicated in schedules. DP or TP switch controlling Junction Box
shall
be provided with neon lamp. Floor mounted J.B. shall be of water tight design as
required by the particular equipment being fed through the J.B.
Indoor Wall mounted Junction box and its associated switch shall White moulded
& provided with flex outlet.
2.03 SWITCHES
A. Switches shall be of minimum 10A ratings unless higher ratings are
shown on drawings.
B. Switches shall generally be flush mounted and of grid type at a height of
1200mm above finished floor level, unless otherwise indicated on the
Drawings. Switches shall be White moulded cover plates as required by
the engineer. Wiring terminals shall be of the screw type or solder-less
pressure type having suitable conductor release arrangement. Where two
or more switches are located in the same position, they shall be installed in
one box and covered by a multi-gang cover plate.
C. Weatherproof switches shall have weather tightness as per Clause 2.01
(F) above.
D. Where Modular switches are employed the cover plate shall be
manufactured in die cast metal with corners of square edged profile, and
finished with a durable heat cured laccure. The Modular switches shall be
1 – 8 gang as indicated in drawings.
2.04 DIMMER SWITCH FOR FLUORESCENT TUBULAR LAMP