Specifications

NAIROBI OPERATIONAL HUB
UNOPS Building, UN Lane, Off UN Avenue Tel: [phone]
P.O Box 783,Village Market, 00621 E-mail: [e-mail]
Nairobi, Kenya Website: www.unops.org
UNOPS is ISO 9001 certified
stated in the specifications and as shown on the drawings and shall show all
pertinent information and data for the fabrication and complete installation.
Material Submittals: Shall be made for 3 different manufacturers. Energy saving
equipment /materials shall be given preference.
B. Manufacturer’s Literature: Manufacturer’s data sheets shall be submitted
indicating the necessary installation dimensions, weights, materials, and
performance information. The performance shall include complete electrical data,
including power conditions and identifying types and numbers. Where pertinent,
electrical diagrams shall be provided. The above information may be provided by
standard sales catalogue sheets marked to indicate the specific equipment
provided.
C. Operations and Maintenance Instructions: The Contractor shall furnish data
covering model, type and serial numbers, capacities, maintenance and operation
of each major item of equipment or apparatus in accordance with the requirements
of the Contract Documents. Operating instructions shall cover all phases of
control.
D. Spare Parts: The Contractor provide as part of this contract sufficient spare parts
required for maintenance of two years of operation after handing over, together
with spare parts lists in accordance with manufacturers’ recommendations and as
directed by the project supervisor.
1.04 Product Handling
A. The Contractor shall be responsible for keeping stocks of material and equipment
stored on the premises in a neat and orderly manner.
B. The exposed surfaces of wire ways, conduit systems or equipment which have
become covered with dirt, plaster or other material during handling and
construction shall be thoroughly cleaned by the Contractor, before such surfaces
are prepared for final finish, painting, or enclosed within the building structure.
C. The Contractor shall clean and maintain the work in accordance with the Contract
stipulations.
1.05 Protection