Specifications

NAIROBI OPERATIONAL HUB
UNOPS Building, UN Lane, Off UN Avenue Tel: [phone]
P.O Box 783,Village Market, 00621 E-mail: [e-mail]
Nairobi, Kenya Website: www.unops.org
UNOPS is ISO 9001 certified
PART 3 EXECUTION
3.1 INSTALLATION GENERAL
A. Refer to Section 16010.
3.2 INSTALLATION OF LIGHTING FIXTURES AND LAMPS.
A. Provide all lighting fixtures and lamps shown on the drawings luminaires
schedule and data sheets attached herein.
B. Include for assembly, and mounting of all fixtures, complete with all wiring,
connections, fittings, hangers, aligners, box covers and accessories which may be
required for any fixture to provide a complete, safe, fully operational assembly.
C. Generally, install fixtures in accordance with applicable reflected ceiling plans
and/or as directed by the Architect. In equipment rooms, shafts and similar
secondary areas, install fixtures after the mechanical and other major work is
roughed-in and adjust fixture locations as required.
D. Thoroughly review all ceiling types, construction details and mounting
arrangements before placing fixture orders and ensure that all mounting
assemblies, frames, rings and similar features are included for and match the
requires installation.
E. All fixtures and fixture assemblies shall be properly secured and supported.
Support fixtures independent of the ceiling construction complete with all
fasteners, framing and hangers. Do not secure fixtures to mechanical ductwork or
other vibration producing apparatus unless specifically detailed on the drawings.
F. Where fixtures are suspended from the structure they shall utilize self aligning
box covers with an additional ground wire from the outlet through the hanger for
continuity of ground.
G. Carefully co-ordinate the fixture installation with the work of other trades
ensuring that the necessary depths and mounting spaces are provided. Do not
alter fixture locations unless approved by the Architect.
H. All lamps shall be new and intact when the project is complete, and ready for
acceptance.