Specifications

11
12
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [e-mail]. Mon.- Fri. Hours: 7 am to 6 pm MST.
Additional Instructions for the AG Pro Installer™
with separate uplink and downlink gain controls
This Signal Booster is supplied with
separate uplink and downlink gain
controls. Note: All gain controls
should be set to maximum. If you
have green lights, the installation is
complete.
If one or more lights are blinking
orange, the Signal Booster is
experiencing receiver overload.
Reduce the uplink (UL) gain control,
without reducing the downlink (DL)
gain to eliminate the overload. This
configuration will eliminate cell tower
interference (overload) without
reducing coverage in the building.
*Note: If the antennas cannot be sufficiently separated, the booster will
have to operate with reduced performance by decreasing the
Downlink Gain until a green light is obtained.
4. SOLID GREEN
The indicator lights on the Signal Booster will be a solid green after
the first 15 minute installation period, if the unit is powered up and
working properly.