Datasheet

9
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
Or email: [e-mail] Hours: 7am to 6pm MST.
10
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
Or email: [e-mail] Hours: 7am to 6pm MST.
Warnings and Recommendations
Warning: The antenna must be installed with a separation distance of at
least 12 inches from any vehicle occupant and must not be located
or operating in conjunction with any other antenna or Signal
Booster. Use of this Signal Booster with an antenna providing
gain higher than 6.12 dBi is in violation of FCC regulations for
which the offender is fully liable. All Wilson Electronics mobile
antennas provide 6.12 dBi gain or less.
Warning: Do not connect the power supply to the Signal Booster until
the Outside Antenna and Cellular Cradle Plus (or Ultra Slim
Antenna) cables are attached to the Signal Booster.
Warning: Do not plug the Signal Booster directly into the cell phone or
cellular data card using an antenna adapter. It could damage
the Signal Booster, cell phone and/or cellular data card.
About Wilson Electronics
Wilson Electronics, Inc. has been a leader
in the wireless communications industry for
over 40 years. The company designs and
manufactures Signal Boosters, antennas and
related components that significantly improve
cellular signal reception and transmission in
a wide variety of applications, both mobile
(marine, RV, vehicles) and in-building (home,
office, M2M).
With extensive experience in antenna and Signal Booster research and design,
the company’s engineering team uses a state-of-the-art testing laboratory,
including an anechoic chamber and network analyzers, to fine-tune antenna
designs and performance. For its Signal Boosters, Wilson Electronics uses
a double electrically insulated RF enclosure and cell tower simulators for
compliance testing.
All products are engineered and assembled in the company’s 55,000-square-foot
headquarters in St. George, Utah. Wilson Electronics has product dealers in all
50 states as well as in countries around the world.
30-Day Money-Back Guarantee
All Wilson Electronics products are protected by Wilson Electronics 30-day money-
back guarantee. If for any reason the performance of any product is not acceptable,
simply return the product directly to the reseller with a dated proof of purchase.
1-Year Warranty
Wilson Electronics Signal Boosters are warranted for one (1) year against defects
in workmanship and/or materials. Warranty cases may be resolved by returning the
product directly to the reseller with a dated proof of purchase.
Signal Boosters may also be returned directly to the manufacturer at the consumer’s
expense, with a dated proof of purchase and a Returned Material Authorization (RMA)
number supplied by Wilson Electronics. Wilson Electronics shall, at its option, either
repair or replace the product. Wilson Electronics will pay for delivery of the repaired
or replaced product back to the original consumer if located in the USA.
This warranty does not apply to any Signal Boosters determined by Wilson Electronics
to have been subjected to misuse, abuse, neglect, or mishandling that alters or
damages physical or electronic properties.
RMA numbers may be obtained by phoning Technical Support at 866-294-1660.
Disclaimer: The information provided by Wilson Electronics, Inc. is believed to
be complete and accurate. However, no responsibility is assumed by Wilson
Electronics, Inc. for any business or personal losses arising from its use, or for
any infringements of patents or other rights of third parties that may result from
its use.
Copyright © 2011 Wilson Electronics, Inc. All rights reserved.
3301 East Deseret Drive, St. George, UT 84790
For additional Technical Support visit www.WilsonElectronics.com
or email at: [e-mail]
Phone: [phone] Local: 435-673-5021 Fax: [phone]
www.twitter.com/WilsonCellular www.facebook.com/WilsonCellular
One or more of the following U.S. Patent numbers may apply to the Signal Booster in this
product – D596,614; D596,615; D563,381;7,729,669; 7,486,929; 7,729,656; 7,409,186;
7,783,318; 7,684,838; 12,714,994.
This device complies with Part 15 of FCC rules. The transaction is subject to two
conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. Changes or modifi cations not expressly approved by Wilson Electronics could
void the authority to operate this equipment.