Datasheet

1
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
Or email: [e-mail] Hours: 7am to 6pm MST.
2
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
Or email: [e-mail] Hours: 7am to 6pm MST.
12-inch Magnet-Mount
Antenna
(301103)
Soft Carrying
Case
(859924)
Mini Magnet-Mount
Antenna
(301113)
Installation Instructions for the Following Wilson Electronics Signal Booster:
SIGNALBOOST™ Dual-Band Mobile Signal Booster
Model #811210
FCC ID: PWO819DA IC: 4726A-819DA
The term “IC” before the radio certification number only signifies that
Industry Canada technical specifications were met.
Inside this Package
Items below may be included with some kits
DUAL-BAND
Signal Booster
Ultra Slim
Antenna
12" Magnet-
Mount Antenna
Cellular
Cradle Plus
Adhesive
Bracket
Cradle Arms
Adhesive/Screw
Swivel Bracket
How it Works
The Signal Booster, in conjunction with the use of an Outside Antenna, will collect the
signal from the cell tower and send it through the cable to the Signal Booster. The state-of-
the-art technology that powers this Signal Booster is designed to increase your signal more
than 20 times, and reduce disconnects and dropped calls. The boosted signal is then sent
to the Cellular Cradle Plus or Ultra Slim Antenna (depending on which one you have). Your
cellular device receives the improved signal. When the cellular device transmits, the signal
goes through the Cellular Cradle Plus or Ultra Slim Antenna, boosted by the Signal Booster
and broadcasted back to the cell tower through the Outside Antenna.
If your kit contains the Cellular Cradle Plus, it provides a convenient place to stow your cell
phone and allows the driver to keep both hands on the wheel while using the phone, greatly
increasing safety. This kit may include different mounting options for installing the cradle on
the dash or console of your vehicle.
If your kit does not contain a Cellular Cradle Plus, it is available for purchase at
www.WilsonElectronics.com
12 V DC power supply
(vehicle)
4" Mini Magnet-
Mount Antenna
Optional Items and Accessories
AC/DC power supply
(859903)
Cellular
Cradle Plus
Available at www.WilsonElectronics.com
Window Bracket
(901128)
(301246)
Ultra Slim Antenna
(301143)
Window Bracket
Not For Sale in U.S. / Canada: 811510, 811514, 811710, 811714, 811910, 811914
Before Getting Started
Magnet-Mount
Antenna
Signal Booster
In-Vehicle Installation Diagram
In-Building Installation Diagram
This guide will help you properly install your Wilson Electronics SIGNALBOOST™
Dual-Band Signal Booster. It is important to read through all of the installation steps
for your particular application prior to installing any equipment. Read through the
instructions, visualize where all the equipment will need to be installed and do a soft
installation before mounting any equipment. Please contact Wilson Electronics Technical
Support with any questions at 866-294-1660. You may also send an email to
[e-mail]
Installation Overview
The following steps provide a summary of the Signal Booster/antenna installation
process using the Mini Magnet-Mount or Magnet Mount Antenna. However, they are not
a substitute for the complete installation instructions on the following pages, which you
should read thoroughly. If you are using a different Outside Antenna, follow the specific
instructions that come with it.
STEP 1: Install the Outside Antenna
For a In-Vehicle installation, attach the Outside Antenna in the center of the vehicle’s roof
and run the cable through the door to the Signal Booster. For In-Building installation, affix
the optional window bracket to a window with the suction cups, attach the Outside Antenna
to the bracket and run the cable to the Signal Booster. (See page 3 for In-Vehicle, and page
8 for In-Building.)
STEP 2: Install the Signal Booster
Position the Signal Booster in a well-ventilated location away from direct sunlight. Run the
cable from the Outside Antenna and attach it to the connector labeled “Outside Antenna” on
the Signal Booster. (See page 4)
STEP 3: Attach the Cellular Cradle Plus or Ultra Slim Antenna
Attach the Cellular Cradle Plus or Ultra Slim cable to the connector labeled “Inside
Antenna” on the Signal Booster. If using the Ultra Slim Antenna, attach the antenna to your
cell phone or cellular data card with the VELCRO
®
provided. (See page 6)
STEP 4: Power up the Signal Booster
IMPORTANT! Before connecting the power supply, ensure that both the Outside Antenna
cable and the Cradle Plus or Ultra Slim cable are connected. (See page 7)
Laptop
Connection
Cell Phone
Connection
SIGNALBOOST™
SIGNALBOOST™
(Products may change due to upgrades)
(Products may change due to upgrades)
(Products may change due to upgrades)
AC Power Supply and
Window Bracket
sold separately
(Part #859940)
Power Supply
Cellular
Cradle Plus
Appearance of device and accessories may vary.