User Manual

4
5
5. AMPLIFIER SPECIFICATIONS
DIRECT CONNECTION AMPLIFIER PHYSICAL SPECIFICATIONS
Connectors FME-Male 50 Ohms
Dimensions 5.5x4.3x1.4 (inch) or 14.0x10.8x3.5 (cm)
Weight 1.32 Pounds or 600G
AMPS #811101 AMPLIFIER SPECIFICATIONS
Frequency 824-849MHz Uplink 869-894MHz Downlink
Gain (up/down) Cell Site Controlled-Max 10/10
Flatness (up/down) (+/- 2dB / +/-2dB)
Max RF (up/down) (+35dBm/+15dBm)
Noise Figure (down) (3.5dB@881MHz)
Isolation Uplink/Downlink 90dB
Power Consumption 1.5A@12V
iDEN #814001 AMPLIFIER SPECIFICATIONS
Frequency 806-821MHz Uplink 851-866MHz Downlink
Gain (up/down) Cell Site Controlled-Max 10/10
Flatness (up/down) (+/- 2dB / +/-2dB)
Max RF (up/down) (+35dBm/+15dBm)
Noise Figure (down) (3.5dB@881MHz)
Isolation Uplink/Downlink 90dB
Power Consumption 1.5A@12V