User's Manual

2
Installation Instructions for the Following Wilson Amplier:
SignalBoost™ Dual-Band Cellular/PCS Amplier
Part / Model #811210
FCC ID: PWO819DA IC: 4726A-819DA
Patent Pending
The term “IC” before the radio certication number only signies that
Industry Canada technical specications were met.
Inside this Package
(antenna required - sold separately)
How it Works
Your new Wilson SignalBoost™ Amplier has been carefully engineered to signicantly
improve the performance of your cell phone or cellular data card in both vehicle and home/
ofce applications. Together with an antenna (sold separately), the amplier’s state-of-
the-art technology is designed to increase your signal up to 10 times, reduce disconnects
and dropouts, and increase data communication rates needed for 3G technologies. The
universal connector ts all cellular and PCS phones and data cards.
The antenna will collect the cell tower signal and send it through the cable to the amplier.
The signal is then boosted and sent through the extension cable to the universal connector
on your cell phone or data card, which then communicates with the improved signal. When
the cell phone or data card transmits, the signal goes through the universal connector
and the extension cable, is boosted by the amplier and broadcast back to the cell tower
through the antenna.
Wilson Electronics manufactures a wide variety of antennas and accessories to help you
customize your SignalBoost™ Amplier for your specic application. Several are shown
below. See your dealer or visit www.wilsonelectronics.com. NOTE: Use of this amplier
with an antenna gain higher than 6.12 dBi is in violation of FCC regulations for which the
offender is fully liable. All Wilson mobile antennas are 6.12 dBi or less.
SignalBoost™
amplier
12 V DC plug-in power
supply (vehicle)
Universal
connector
6‘ extension
cable
4-inch Mini
Magnet-Mount
Antenna
12-inch
Magnet-Mount
Antenna
Soft Carrying
Case
AC/DC Plug-In Power
Supply (home/ofce)
Window Bracket