User's Manual

ManualsBrandsWilson Electronics ManualsElectronicsSignalBoost Dual-Band Cellular/PCS Amplifier

Amplifier

Installation

Guide

Warning: This manual contains

important safety and operating information.

Please read and follow the instructions

in this manual. Failure to do so could be

hazardous and result in damage to your

amplier.

SignalBoost™

Dual-Band

Cellular / PCS

Amplier

PART/MODEL# 811210

Contents:

Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · · 1

How it Works · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2

Before Getting Started · · · · · · · · · · · · · · · · · · · · · · · · · · 3

Installation Overview · · · · · · · · · · · · · · · · · · · · · · · · · · · 3

Installing the Antenna (Vehicle) · · · · · · · · · · · · · · · · · · · 4

Installing the SignalBoost™ Amplier (Vehicle) · · · · · · · 5

Installing the Antenna (Home/Ofce) · · · · · · · · · · · · · · · 6

Installing the SignalBoost™ Amplier (Home/Ofce) · · · 6

Installing the Universal Connector · · · · · · · · · · · · · · · · · 7

Powering Up the Amplier · · · · · · · · · · · · · · · · · · · · · · · 8

Warnings and Recommendations · · · · · · · · · · · · · · · · · 9

About Wilson Electronics · · · · · · · · · · · · · · · · · · · · · · · · 10

Amplier Specications · · · · · · · · · · · · · · · · · · Back Cover

Wilson

Electronics, Inc.

Summary of content (12 pages)

PAGE 1
Amplifier Installation Guide SignalBoost™ Dual-Band Cellular / PCS Amplifier PART/MODEL# 811210 Contents: Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · · 1 How it Works · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2 Before Getting Started · · · · · · · · · · · · · · · · · · · · · · · · · · 3 Installation Overview · · · · · · · · · · · · · · · · · · · · · · · · · · · 3 Installing the Antenna (Vehicle) · · · · · · · · · · · · · · · · · · · 4 Installing the Signa
PAGE 2
30-Day Money-Back Guarantee All Wilson Electronics products are protected by Wilson’s 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 1-Year Warranty Wilson Electronics amplifiers are warranted for one (1) year against defects in workmanship and / or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.
PAGE 3
Installation Instructions for the Following Wilson Amplifier: SignalBoost™ Dual-Band Cellular/PCS Amplifier Part / Model #811210 FCC ID: PWO819DA IC: 4726A-819DA Patent Pending The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
PAGE 4
Before Getting Started This guide will help you properly install Wilson’s dual-band, SignalBoost™ amplifier. It is important to read through all of the installation steps for your particular application prior to installing any equipment. Read through the instructions, visualize where all the equipment will need to be installed and do a soft installation before mounting any equipment. If you do not understand the instructions in full, please contact Wilson Technical Support at 866-294-1660.
PAGE 5
Vehicle Installation Installing the Antenna To receive the best cell signal, select a location in the center of the vehicle’s roof at least 12 inches away from any other antennas and free of obstructions. The antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical. The antenna cable may be run through the door to the amplifier. ! Warning: The antenna used with this amplifier must have a separation distance of at least 11 inches from all persons.
PAGE 6
Vehicle Installation Installing the Wilson SignalBoost™ Amplifier ! Warning: Do not plug in the DC power supply until the antenna and universal connector cables are attached to the amplifier. Select a location to install the amplifier that is away from excessive heat, direct sunlight or moisture and that has proper ventilation.
PAGE 7
Home/Office Installation Installing the Antenna To receive the best cell signal, select a window location at least 12 inches away from any radio or television antennas and free of obstructions. Using the suction cups, position the mounting bracket on the window at a height convenient to where the amplifier will be located, then attach the antenna to the bracket. The antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical.
PAGE 8
Installing the Wilson Universal Connector Amplifier 6’ Extension Cable Universal Connector The universal connector must be placed directly on the cell phone or cellular data card to work properly. Attach the universal connector to the cell phone or cellular data card with the VELCRO® included in the package. The universal connector and extension cable included in the package are long enough to reach the amplifier location. This allows for ease and convenience of use.
PAGE 9
Powering up the Amplifier Make sure both the outside antenna and universal connector cables are connected before powering up the amplifier. For vehicle use, connect the power cable from the DC plug-in power supply to the amplifier input marked “Power” and insert the large end into DC power socket (the cigarette lighter outlet). Carefully insert the power cable.
PAGE 10
Warnings and Recommendations Warning: Do not plug the amplifier directly into the cell phone or cellular data card using an antenna adapter. It will damage the cell phone or cellular data card. Warning: Do not plug in the power supply until the antenna and universal connector cables are attached to the amplifier.
PAGE 11
About Wilson Electronics Wilson Electronics, Inc. has been a leader in the wireless communications industry for nearly 40 years. The company designs and manufactures amplifiers, antennas and related components that significantly improve cellular telephone signal reception and transmission in a wide variety of applications, both mobile and in-building.
PAGE 12
Amplifier Specifications Model Number Connectors Impedance (input/output) Dimensions Weight Frequency 1 Passband Gain (nominal) 800 MHz (uplink/downlink) 1900 MHz (uplink/downlink) 2 20 dB Bandwidth (nominal) 800 MHz (uplink/downlink) 1900 MHz (uplink/downlink) ³Power output for single cell phone (uplink) CDMA GSM EDGE AMPS Power output for single received channel (downlink) Power output for multiple received channels (downlink).