User's Manual

ManualsBrandsWilson Electronics ManualsElectronicsDual Band Bidirectional Amplifier

Installation Guide

Wilson Electronics, Inc.

3301 E. Deseret Drive, St. George, Utah 84790

For additional technical support go to

www.wilsonelectronics.com

Phone: 1-866-294-1660 Fax: 1-435-656-2432

DIRECT CONNECTION

Vehicle & Building

The term “IC:” before the radio certification number only signifies

that Industry of Canada technical specifications were met.

AMPS

DIRECT

CONNECTION

AMPLIFIER

Part# 811101

FCC ID: PWO824D

IC: 4726A-824D

iDEN

DIRECT

CONNECTION

AMPLIFIER

Part# 814001

FCC ID: PWO806D

IC: 4726A-806D

DUAL BAND

DIRECT

CONNECTION

AMPLIFIER

Part# 811201

FCC ID: PWO819D

IC: 4726A-819D

Summary of content (8 pages)

PAGE 1
Vehicle & Building DIRECT CONNECTION Installation Guide AMPS DIRECT CONNECTION AMPLIFIER Part# 811101 FCC ID: PWO824D IC: 4726A-824D iDEN DIRECT CONNECTION AMPLIFIER Part# 814001 FCC ID: PWO806D IC: 4726A-806D DUAL BAND DIRECT CONNECTION AMPLIFIER Part# 811201 FCC ID: PWO819D IC: 4726A-819D Wilson Electronics, Inc. 3301 E. Deseret Drive, St. George, Utah 84790 For additional technical support go to www.wilsonelectronics.
PAGE 2
1. PURPOSE OF THE DIRECT CONNECTION AMPLIFIER The Direct Connection with no signal or low 800MHz up to 3 watts 1900MHz frequencies. up to 3 watts. Bi-directional Amplifier improves RF coverage in areas signal strength. Part# 811101 Amplifies the signal on and allows for the full benefit of the outside antenna on Part# 814001 Amplifies the iDEN (Nextel) frequencies 2. PACKAGE CONTENTS 2.1 Bi-directional Direct Connection Amplifier. 2.2 DC plug-in power supply with ON/OFF switch. 2.3 6ft.
PAGE 3
4. AMPLIFIER INSTALLATION (see illustration on pg.4) 4.1 Installing the Wilson Cellular Antenna 4.1.1 See antenna packaging for model specific instructions. WARNING: Verify that both the outside antenna and adapter extension cable are connected before powering up the AMPLIFIER. RF SAFETY WARNING: (MOBILE ONLY) The outside antenna must be mounted with a separation distance of at least 15.
PAGE 4
In-Building Installation �� Mobile Installation �� 4
PAGE 5
reference chart. If your phone’s adapter is not available from your retailer contact us at 1-866-294-6996 and we will help you locate one in your area. For further assistance contact our technical support TollFree at 1-866-294-1660. NOTE: iDEN Antennas are recommended for iDEN Amplifier 814001. 5.
PAGE 6
. OPTIONAL ACCESSORIES/ANTENNA OPTIONS 6.1 Coax Cable Extensions 50Ω (see chart on pg.7) 6.2 Antenna Options (see chart on last page) 6.3 N-Female To FME-Female Adapter - Adapts 9913 Coax to the 814001 Bi-directional Amplifier. 6.4 Lightning Suppressor (In-Building application) WARNING: Lightning protection is recommended for all In-Building installations. 6.5 Hardwire Power Supply Kit.
PAGE 7
8. TECH SUPPORT If you need further assistance with your installation: 1) Call us Toll-Free at 866-294-1660 2) E-mail tech support at tech@wilsonelectronics.com 3) Go to www.wilsonelectronics.com Our Hours of Operation are: 8:00 AM – 4:30 PM (Mountain Time) EXTENSION CABLE CHART (RG 58 - FME connectors / 9913 - N connectors) 951101 5’ Extension Cable RG 58 Low Loss Coax (0.6 db loss) 951102 10’ Extension Cable RG 58 Low Loss Coax (1.
PAGE 8
Outside Antenna Options For more options visit www.wilsonelectronics.com �� Pictures Are Not To Scale Not All Outside Antenna Options Are Shown Questions? 1-866-294-1660 www.wilsonelectronics.