Mobile & In-Building DIRECT CONNECTION Installation Guide iDEN High Power DIRECT CONNECTION iDEN High Power Smart TechnologyTM Amplifier Part# 814004 FCC ID: PWO8140SD IC: 4726A-8140SD Wilson Electronics, Inc. 3301 E. Deseret Drive, St. George, Utah 84790 For additional technical support go to www.wilsonelectronics.com Phone: 1-866-294-1660 Fax: 1-435-656-2432 The term “IC:” before the radio certification number only signifies that Industry of Canada technical specifications were met.
1. PURPOSE OF THE DIRECT CONNECTION AMPLIFIER The Direct Connection Bi-directional Amplifier improves cell phone coverage in areas with low signal strength. 2. PACKAGE CONTENTS 2.1 Bi-directional Direct Connection Amplifier. 2.2 DC plug-in power supply with ON/OFF switch. 2.3 6ft. adapter extension cable. Package Contents 6FT ADAPTER EXTENSION CABLE 12V DC CIGARETTE LIGHTER PLUG AMPLIFIER 3.
4. AMPLIFIER INSTALLATION (see illustration on pg.4) 4.1 Installing the Wilson Cellular Antenna 4.1.1 See antenna packaging for model specific instructions. 4.1.2..See Warnings (Section 7) 4.2 Installing The Amplifier 4.2.1 Select a suitable location to mount the AMPLIFIER. The amplifier can be mounted to the selected location using screws. (Screws not included.) Mount the AMPLIFIER away from direct sunlight, excessive heat and/ or moisture. The amplifier needs proper ventilation. 4.2.
In-Building Installation Outside Antenna (Optional Yagi Antenna Shown) ell te Cell Site Outside Antenna to Amplifier Connection AC/DC Transformer (Optional) Cellphone Amplifier Mobile Installation Outside Antenna (Not Included) Cell Site Cellphone 12V DC Power Adapter Cigarette Lighter Plug (Included) Amplifier
. AMPLIFIER SPECIFICATIONS Part Number #814004 Connectors FME-Male 50 Ohms Dimensions 5.5x4.3x1.4 inch (14.0x10.8x3.5 cm) Weight 1.32 Pounds (600 Grams) 806-821 MHz Uplink 851-866 MHz Downlink Frequency Gain Cell Site Controlled Flatness up/down +/-2 dB / +/-3 dB Max RF up/down +35 dBm / +15 dBm Noise Figure down 3.5 dB nominal Isolation Power Requirements Uplink/Downlink 90 dB 13.8 V, 1.
. OPTIONAL ACCESSORIES/ANTENNA OPTIONS 6.1 6.2 6.3 6.4 Coax Cable Extensions 50Ω (see chart on pg.7) Antenna Options (see chart on last page) N-Female To FME-Female Adapter - Adapts 9913 Coax to the Bi-directional Amplifier. Lightning Surge Protector (In-Building application) WARNING: Lightning protection is recommended for all In-Building installations. 6.5 Hardwire Power Supply Kit.
EXTENSION CABLE CHART (RG58U - FME connectors / 9913 - N connectors) 951101 5’ Extension Cable RG58U Low Loss Coax 951102 10’ Extension Cable RG58U Low Loss Coax (1.2 db loss) 951103 15’ Extension Cable RG58U Low Loss Coax (1.8 db loss) 951104 20’ Extension Cable RG58U Low Loss Coax (2.4 db loss) N-Male to FME Female 951108 20’ Extension Cable 9913 Equivalent Ultra Low Loss Coax Only use 9913 Equivalent Low Loss Coax for extensions 20’ or longer (0.
Outside Antenna Options For more options visit www.wilsonelectronics.com Yagi Single-Band (For Building Intallations Only) Pictures Are Not To Scale Not All Outside Antenna Options Are Shown Questions? 1-866-294-1660 www.wilsonelectronics.
