User's Manual

Rev 1 PAGE 6
5.3 Installing the Inside Antenna (Included)
5.3.1 Connect the Inside Antenna to the side labeled “INSIDE ANTENNA” on
the AMPLIFIER.
5.3.2 The Inside Antenna should be centered in the vehicle. It can be placed in
the seat back between the seat cushion and fabric or in the vehicle
headliner.
WARNING: The inside antenna used with this amplifier must be mounted
with a separation distance of at least 8 inches(20cm) from all persons and
must not be co-located or operating in conjunction with any other antenna
or amplifier.
5.4 Connect the 12V Power Supply
5.4.1 Connect the large end of the 12V Power Supply into your cigarette lighter
and the other end into the input on your amplifier labeled “DC 12V IN”.
7. TECH SUPPORT
If you need further assistance with your installation please call us Toll-Free at 866-
294-1660 or send an E-mail to [e-mail]
Our Hours of Operation are: 8:00 AM – 4:30 PM (Mountain Time)
8. NOTES & WARNINGS
NOTE: When using a magnet mount, NMO or trucker antenna
, keep the
separation distance between the inside and outside antennas at least 4ft. When
using a glass mount antenna
, keep the separation distance between the inside
and outside antennas at least 5ft.
WARNING: The outside antenna used with this amplifier must be mounted
with a separation distance of at least 8 inches(20cm) from all persons and must
not be co-located or operating in conjunction with any other antenna or amplifier.
WARNING: The inside antenna used with this amplifier must be mounted with
a separation distance of at least 10 inches(25cm) from all persons and must not
be co-located or operating in conjunction with any other antenna or amplifier.